Manual Casio 5325 (page 1 of 9) (English)

624831

Zoom out

Zoom in

1/9

Operation Guide 5325

E-4

To start HS1 high-speed movement

While the crown is pulled out, rotate it rapidly three turns away from you (for

forward movement) or towards you (for reverse movement). High-speed

movement will continue even if you release the crown.

To start HS2 high-speed movement

While HS1 high-speed movement is progress, again rotate the crown rapidly three

turns in the same direction as the current HS1 movement (away from you for

forward movement or towards you for reverse movement).

To stop high-speed movement

Rotate the crown in the direction that is opposite that of the current high-speed

movement or press any button.

Note

 If you do not perform any operation for more than two minutes after pulling out the crown, crown

operations will become disabled automatically. If this happens, push the crown back in and then pull it

out again to re-enable crown operations.

 You can use high-speed hand movement when conﬁ guring time settings in the Timekeeping Mode,

Alarm Mode, or Countdown Timer Mode.

 Button operations become disabled after you perform a crown operation. If this happens, rotate the

crown slightly. This should restore button operations.

MA1302-EA

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

 Note that the product illustrations in this manual are intended for reference only, and so the actual product

may appear somewhat different than depicted by an illustration.

This watch does not have a city code that corresponds to the UTC offset of –3.5 hours. Because of

this, the radio-controlled atomic timekeeping function will not display the correct time for Newfoundland,

Canada.

Warning!

 The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered as

reasonable representations only.

 To ensure correct direction readings by this watch, be sure to perform bidirectional calibration before

using it. The watch may produce incorrect direction readings if you do not perform bidirectional

calibration. For more information, see “To perform bidirectional calibration” (page E-37).

 Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered

by you or any third party arising through the use of this product or its malfunction.

E-2

About This Manual

Operations are performed using the watch’s crown, and the three buttons

indicated by the letters A, B and C in this manual.

Hands and Indicators

z Hour Hand

x Second Hand

c Minute Hand

v Upper Dial Hand: Indicates a time, in 24-hour format, depending on the

current mode.

b Lower Dial Hand: Indicates the current mode.

n Day Indicator

This User’s Guide uses numbers shown above to identify watch hands and

indicator.



@>B

E-3

Using the Crown

The crown of this watch is a screw in lock crown. Before using the crown, you

must ﬁ rst rotate it towards you to loosen it.

Important!

 To maintain water resistance and avoid impact damage to the crown, be sure

to screw it back in when you are not using it.

The illustrations below show the different crown operations.

Pull out Rotate Push in

High-speed Movement

When rotating the crown to move the hands of the watch, you can use the operations described below

to move the hands at high speed, either forward or back. There are two high-speed levels: HS1 and HS2

(faster than HS1).

Crown

Loosen

E-5

Things to check before using the watch

1. Hold down C at least two seconds to enter the Timekeeping Mode, and then observe the

movement of the x

Second Hand.

Is the x Second Hand moving smoothly at one-second intervals?

Is the x Second Hand moving at two-second

intervals or is it stopped completely?

Go to step 2.

The watch is charged. For details about

charging, see “Charging the Watch” (page E-10).

Power is low. Charge the watch by placing it in a

location where it is exposed to light. For details,

see “Charging the Watch” (page E-10).

YES

2. Check the Home City.

Use the procedure under “To conﬁ gure Home City settings” (page E-25) to conﬁ gure your Home City.

Important!

 Proper time calibration signal reception depends on correct Home City, time, and day settings in the

Timekeeping Mode. Make sure you conﬁ gure these settings correctly.

E-6

3. Set the current time.

 To set the time using a time calibration signal

See “To get ready for a receive operation” (page E-17).

 To set the time manually

See “Conﬁ guring Current Time and Day Settings Manually” (page E-28).

The watch is now ready for use.

 For details about the watch’s radio controlled timekeeping feature, see “Radio Controlled Atomic

Timekeeping” (page E-15).

E-7

Contents

E-2 About This Manual

E-3 Using the Crown

E-5 Things to check before using the watch

E-10 Charging the Watch

E-11 To check the current power level

E-14 To recover from the sleep state

E-15 Radio Controlled Atomic Timekeeping

E-17 To get ready for a receive operation

E-19 To perform manual receive

E-20 To check the result of the latest receive operation

E-20 To turn auto receive on and off

E-22 Mode Reference Guide

E-23 To determine the watch’s current mode

E-23 To return to the Timekeeping Mode from any other mode

E-23 To select a mode

E-24 Timekeeping

E-25 Conﬁ guring Home City Settings

E-25 To conﬁ gure Home City settings

E-27 To switch between standard time and summer time manually

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5325 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5325

Casio 5325 User Manual - German - 9 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio 5325 Manual

Product: