734946

Yardforce M0E-16ET-410 Manual

5
Zoom out
Zoom in
Previous page
1/29
Next page
6 7
SAFETY INFORMATION
GENERAL POWER TOOL SAFETY WARNINGS
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury. The term “power tool” in all warnings
listed below refers to your mains operated power tool.
1. Read the instruction carefully. Be familiar with
the controls and the correct use of the appliance.
Read and understand the operator’s manual and
observe the warnings and instruction labels afxed
to the appliance.
2. Users. Never allow children or people unfamiliar
with these instructions to use the appliance. Local
regulations may restrict the age of operator. Never
operate the tool under the inuence of alcohol,
medication or drugs.
3. Use appropriate tool. This device is only intended
for trimming hedge outdoors and only designated
for use on private property. Do not force small
tools or attachments to do the job of a heavy duty
tool.
4. Keep work areas clean. Cluttered areas can
cause accidents.
5. Consider work area environment. Do not expose
the tool to high humidity or rain. Do not use the
tool in damp and wet conditions. Keep the work
area well lit. Do not use the tool where there is
a risk of causing re or explosion, e.g. in the
presence of ammable liquids and gases.
6. Keep all bystanders, children, and pets away.
The operator or user is responsible for accidents or
hazards occurring to other people or the property.
7. Dress appropriately. Do not wear loose clothing,
hair or jewelry, as these can be caught in moving
parts. Preferably wear non-slip footwear when
working outdoors. Wear protective hair covering to
keep long hair out of the way.
SAFETY INFORMATION
8. Head protection. Always use safety glasses and
gloves. Use a face or dust mask whenever the
operations may produce dust or ying particles.
Wear ear protection whenever the sound level
seems uncomfortable.
9. Do not overreach. Keep proper footing and
balance at all times.
10. Stay alert, watch what you are doing. Use
common sense when operating the appliance. Do
not operate the tool when you are tired.
11. Grip the tool securely. Operator should have one
hand on the main handle, the other on the front
handle. Keep nger off trigger until ready to use.
12. Remove adjusting keys and wrenches. Always
check that adjusting keys and wrenches are
removed from the tool before operating the tool.
13. Risk of cut. Do not try to grasp or remove
trimmings when the product is running. Only
remove trimmings when the product is switched
off and disconnected from the power supply.
14. Disconnect the battery. Disconnect battery from
the tool when not in use or when servicing or
cleaning.
15. Check for damaged parts. Before further use,
carefully check the tool for damage. Check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any other
condition that may affect its operation. Do not use
the tool if any parts are damaged or defective.
Have any damaged or defective parts repaired or
replaced by an authorized service agent. Never
attempt any repairs yourself.
16. Store idle tools. When not in use, tools should
be stored in a dry, locked-up place out of reach of
children.
17. Maintain tools with care. Keep tools clean and in
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce M0E-16ET-410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce M0E-16ET-410 in the language / languages: English, German as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info