734946

Yardforce M0E-16ET-410 Manual

4
Zoom out
Zoom in
Previous page
1/29
Next page
4 5
TECHNICAL SPECIFICATIONS
Model Number M0E-16ET-410
Voltage 18V d.c.
Battery type Lithium-Ion
No load speed 1400/min
Cutting length/Capacity 410mm/14mm
Tooth gap 16mm
Measured sound pressure level(L
pA
) 75dB(A) K=3.0 dB(A)
Measured sound power level(L
wA
) 87.9dB(A) K=3.0 dB(A)
Guaranteed sound power level(L
wA
) 90 dB(A)
Weight 3.4 kg
Vibrations 2.0 m/s² K=1.5 m/s²
Battery pack
Battery pack B0P-SP02-20-15B
Battery type Lithium-Ion
Battery capacity 1500mAh
Battery voltage 18V d.c.
Charger
Charger Type SMVCH001212000G
Rated Voltage 230-240V~/50Hz
Nominal Consumption 50W
Output Voltage of Charge 21V d.c.
Output Current of Charge 2A
Charging time Approx.60min
Protection Class Class II
Protection Category IPX0
The sound values have been determined according to noise test code given in EN 60745-
2-15, using the basic standards EN ISO 11094 and EN ISO 3744.
The noise Abb.ures quoted are emission levels and are not necessarily safe working levels.
Factors that inuence the actual level of exposure of work-force include the characteristics
of the work room, the other sources of noise, etc. i.e. the number of machines and other
adjacent processes, and the length of time for which an operator is exposed to the noise.
Also the permissible exposure level can vary from country. This information, however, will
enable the user of the machine to make a better evaluation of the hazard and risk.
Wear hearing protection! The sound intensity level for the operator may exceed 80 dB (A)
and ear protection measures are necessary!
The declared vibration value has been measured in accordance with a standard test
method (according to EN 12096) and may be used for comparing one product with
another. The declared vibration value may also be used in a preliminary assessment of
exposure.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
INTENDED USE
This Li-ion pole hedge trimmer M0E-16ET-460 is intended for trimming hedges, bushes
and shrubs. Observe the technical data for the maximum cutting capacity. Do not cut non
plant material or branches exceeding the stated maximum capacity. For safety reasons it
is essential to read the entire instruction manual before rst operation and to observe all
the instructions there in. This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other than those described.
TECHNICAL SPECIFICATIONS
WARNING!
Depending on the actual use of the product the vibration values can differ from the
declared total! Adopt proper measures to protect yourself against vibration exposures!
Take the whole work process including times the product is running under no load or
switched off into consideration!
Proper measures include among others regular maintenance and care of the product and
cutting attachments, keeping hands warm, periodical breaks and proper planning of work
processes!
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce M0E-16ET-410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce M0E-16ET-410 in the language / languages: English, German as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info