734946
7
Zoom out
Zoom in
Previous page
1/29
Next page
10 11
SAFETY INFORMATION
Never modify the plug in any way. Unmodied
plug sand matching outlets will reduce risk of
electric shock.
2. Use your charger only to charge batteries
of the type supplied with your tool. Other
batteries could burst, causing personal injury
and damage.
3. Only 2 battery packs are allowed to be charged
continuously in order to prevent over heating of
charger, necessary rest time is required to let
the charger cool down before further charging.
4. When charging is nished, takeaway the
battery pack from the charger, do not leave the
battery pack in the charger.
5. Never carry the charger by its cord or pull it
to disconnect from the socket. Keep the cord
away from heat, oil and sharp edges.
6. Never attempt to charge non-rechargeable
batteries.
7. The cord of the charger is not changeable, do
not continue to use if the cord is damaged.
8. Do not expose to water or rain, do not use in
wet condition.
9. Do not open the charger.
10. Do not probe the charger.
11. Intended for indoor use only.
ADDITIONAL SAFETY INSTRUCTIONS FOR
HEDGE TRIMMERS
1. THIS TOOL CAN CAUSE SERIOUS INJURIES.
Read instructions carefully for the correct
handling, preparation, maintenance, starting
and stopping of the tool. Be familiar with all
SAFETY INFORMATION
controls and proper use of the tool.
2. Only use the tool in daylight or good articial
light.
3. Never allow children to use the tool.
4. Beware of overhead power lines.
5. Avoid operating while people, especially
children are nearby.
6. Dress properly! Do not wear loose clothing or
jewellery which can be caught in moving parts.
Use of sturdy gloves, non-skid footwear, and
safety glasses is recommended.
7. If the tool stalls, immediately switch it off.
Remove the battery before attempting to
remove any obstructions.
8. Remove the battery before checking,
maintenance or working on the tool.
9. While operating the tool always be sure of a
safe and secure operating position especially
when using steps or a ladder.
10. Do not attempt to repair the tool.
11. Do not operate the tool with a damaged or
excessively worn cutting device.
12. Always wear ear protection, goggles and a
helmet during operating.
13. Always ensure that all guards are tted when
using the tool. Never attempt to use an
incomplete tool or a tool with unauthorized
modications.
14. Always use two hands to operate the tool.
15. When transporting or storing the tool, always t
the blade sheath.
16. Always be aware of your surroundings and stay
alert for possible hazards that you may not
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce M0E-16ET-410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce M0E-16ET-410 in the language / languages: English, German as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info