674740
112
Zoom out
Zoom in
Previous page
1/154
Next page
Page 110 FT-991 OperaTing Manual
usinG the Gps function
Connecting a YAESU
FT1DR/DE
,
FTM-400DR/DE
or a commercially available GPS receiver/antenna to the
FT-991
will permit the transceiver to constantly receive and display the station location information.
By utilizing the GPS location information, you can register stations with which you frequently communicate and use the
GM function to conrm whether they are within communication range.
WhAt iS gpS?
GPS or Global Positioning System is a satellite location
system that is used to determine the current position on
earth. It is a military system developed by the US De-
partment of Defense with approximately 30 GPS satel-
lites orbiting the earth at an altitude of about 20,000 km,
When signals from three or more satellites in space are
received, the current position information (longitude,
latitude, altitude etc.) may be determined within an ac-
curacy of several meters. The accurate time can also be
received from the atomic clock built into the GPS satel-
lite.
About GPS Positioning
Positioning refers to the calculation of one’s own position derived from the satellites orbit information and the
transmission time of the radio waves. Positioning requires that three or more satellites be acquired. When posi-
tioning cannot be carried out properly, move to an open space as far away from buildings as possible and where
there are fewer obstructions.
About the Error
Depending on the surrounding environment of the receiver location, an error of several hundred meters may oc-
cur. Although positioning is possible using only three satellites, depending on the positioning conditions, the po-
sitioning accuracy may become worse, or may no longer be possible under the following conditions:
Between high rise buildings, narrow roads between buildings, indoors and under the shade of buildings, be-
low high voltage lines and underneath overhead structures, between trees and shrubs such as in forests and
woods, inside tunnels and underground, when used behind a solar-energy reecting glass, locations where a
strong magnetic eld occurs
When not Using the Radio for a Long Period of Time
When using the GPS function for the rst time after purchasing the
FT-991
transceiver, and when turning it on
after It has not been used for a long period time, positioning may take several minutes in order to search for the
satellites. Also, when using the device again several hours after switching off the power, positioning may take
several minutes in order to search for the satellites.
poSitioning uSing gpS
1. Press and hold in the front panel
ON/OFF
switch to
turn the transceiver on.
The satellite search will begin and the icon will
be displayed at the top right of the screen.
Advice:
It may take several minutes to acquire the satel-
lites.
When three or more satellites cannot be acquired,
the icon display will disappear. In this case, posi-
tioning is not possible and the position informa-
tion cannot be used.
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info