674740
113
Zoom out
Zoom in
Previous page
1/154
Next page
Page 111FT-991 OperaTing Manual
usinG the Gps function
Positioning Using an External GPS Device
A YAESU
FT1DR/DE
,
FTM-400DR/DE
or a commercially available GPS receiver/antenna may be connected to the
GPS/CAT
jack on the rear panel.
The
GPS/CAT
jack connector is illustrated below.
connecting to the Ft1dr/de
connecting to the FtM-400dr/de
1. Press the front panel
ON/OFF
switch to turn the
transceiver off.
2. Plug the connector of the external device into the
GPS/CAT
jack on the rear panel.
3. Press and hold in the front panel
ON/OFF
switch to
turn the transceiver on.
4. Press the
MENU(SETUP)
button to enter the Menu
mode.
5. Rotate the
MULTI
knob to select Menu item
028
GPS/232C SELECT
”.
6. Touch
[
SELECT
] on the LCD, then rotate the
MULTI
knob to set this Menu item to
GPS1
” or
GPS2
” (the default setting is “
GPS1
”).
GPS1
: Enables connection to an external GPS de-
vice.
GPS2
: Enables connection to an external GPS de-
vice, and displays the location information in
real time.
7. Touch
[
ENTER
]
on the LCD to save the new set-
ting.
8. Press the
MENU(SETUP)
button or touch
[
BACK
]
on the LCD to exit to normal operation.
When the external device acquires three or more
satellites, the “ icon will be displayed on the top
right of the screen.
GPS/CAT Jack
ON/OFF Switch MENU(SETUP
)
Button
MULTI Knob
Advice:
When connecting to an external GPS device, refer
to the operating manual of the connected device as
well.
When using an external GPS device, separate the
FT-991
transceiver away from the external GPS de-
vice to reduce the possibility of RF interference.
poSitioning uSing gpS
TXD (Serial data output) (FT1DR/DE FT-991)
RXD (Serial data input) (FT1DR/DE FT-991)
GND
GPS/CAT Jack
(CT-169 Option)
FT1DR/DE
TXD (Serial data output)
(FTM-400DR/DE FT-991)
RXD (Serial data input)
(FTM-400DR/DE FT-991)
GND
GND (Heavy black line)
TXD (Blue)
RXD (Gray)
GPS/CAT Jack
(CT-167 Option)
FTM-400DR/DE
TXD (Serial data output) (FTM-400DR/DE FT-991)
RXD (Serial data input)(FTM-400DR/DE FT-991)
GND
GPS/CAT Jack
(CT-165 Option)
FTM-400DR/DE
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info