478498
34
Zoom out
Zoom in
Previous page
1/84
Next page
32 FT-817ND Operating Manual
Operation using Built-in Electronic Keyer
The built-in Electronic Keyer provides a convenient method of generating CW. The Elec-
tronic Keyer includes weight and speed adjustments.
1. Connect your keyer paddle’s cable to the KEY jack on the rear panel of the transceiver.
2. Press the / key, as needed, to select the CW (CW/CWR) mode.
3. Press the key momentarily, then rotate the knob, as needed, until Operating
Function Row 10
[
VOX, BK, KYR
]
appears on the display.
4. Press the
(
KYR
)
key to activate the Electronic Keyer. The “” icon will appear at
the right of the “KYR” indication.
5. The Keyer speed may be adjusted using Menu #21 (CW SPEED). To adjust the Keyer
speed:
Press and hold in the key for one second to enter the Menu mode.
Rotate the knob to select Menu #21 (CW SPEED).
Press the knob if you wish to select display of “cpm” (characters per minute)
instead of “wpm” (words per minute). The “cpm” selection is based on the interna-
tional “PARIS” standard, which stipulates five characters per word.
Rotate the knob, while sending, to set the desired sending speed.
When done, press and hold in the key for one second to save the new setting and
exit to normal operation.
If you are already using Operating Function Row 10
[
VOX, BK, KYR
]
, press
and hold in the [C](KYR) key to switch instantly to Menu #21 (CW SPEED).
6. The Dot:Dash weighting ratio may be adjusted via Menu #22 (CW WEIGHT). To adjust
the Dot:Dash weighting ratio:
Press and hold in the key for one second to enter
the Menu mode.
Rotate the knob to select Menu #22 (CW
WEIGHT).
Rotate the knob to set the desired weight.
When done, press and hold in the key for one second
to save the new setting and exit to normal operation.
7. You may select “normal” or “reverse” paddle polarity via Menu #19 (CW PADDLE).
The default setting for this feature is “normal,” whereby the “Tip” connection on the
Key Plug is “Dot” and the “Ring” connection is “Dash.” To change the paddle polarity:
Press and hold in the key for one second to enter the Menu mode.
Rotate the knob to select Menu #19 (CW PADDLE).
Rotate the knob to select the new setting.
When done, press and hold in the key for one second to save the new setting and
exit to normal operation.
CW TRANSMISSION
TRANSMITTER OPERATION
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info