478498
32
Zoom out
Zoom in
Previous page
1/84
Next page
30 FT-817ND Operating Manual
CW TRANSMISSION
Operation using Straight Key/External Keying Device
When using a straight key, an external electronic keyer, or a computer-generated keying
device, please follow the instructions in this section.
1. Insert your key’s (three-conductor) plug into the rear-panel KEY jack.
2. Press the / key, as needed, to select one of the CW (CW/CWR)
modes.
The “CW” mode utilizes USB-side carrier injection, while the CWR (Reverse)
mode utilizes LSB-side injection.
3. Press the key momentarily, then then rotate the knob, as needed, until Oper-
ating Function Row 10
[
VOX, BK, KYR
]
appears on the display.
4. Press the
(
BK
)
key, as needed, to activate “Semi Break-In” operation. The “
icon will appear at the right of the “BK” indication.
5. The CW hang time can be adjusted using Menu #17 (CW DELAY). To adjust the CW
hang time:
Press and hold in the key for one second to enter the Menu mode.
Rotate the knob to select Menu #17 (CW DELAY).
Rotate the knob to select a longer or shorter delay time (default: 250 ms).
This transceiver was not expressly designed for “full QSK” operation, the minimum
(10 ms) setting of this Menu item (CW DELAY) will be very close to full break-in
performance.
When done, press and hold in the key for one second to save the new setting and
exit to normal operation.
If you are already in Operating Function Row 10
[
VOX, BK, KYR
]
, pressing
and holding in the
(
BK
)
key for one second will instantly select Menu #17
(CW DELAY).
6. To practice your CW sending (without transmitting), press the
(
BK
)
key to make
the “” icon disappear. Now, pressing the key will cause the CW sidetone to be heard,
but your radio will not be transmitting a signal on the air.
7. You can adjust the CW sidetone volume level via Menu #44 (SIDETONE). To adjust the
CW sidetone volume level:
Press and hold in the key for one second to enter the Menu mode.
Rotate the knob to select Menu #44 (SIDETONE).
Rotate the knob to select a new level; on the arbitrary scale of “0” ~ “100,”
the default value is “50.”
When done, press and hold in the key for one second to save the new setting and
exit to normal operation.
TRANSMITTER OPERATION
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info