730156
3
Zoom out
Zoom in
Previous page
1/6
Next page
Using
Functions
Indicator status
Selecting an installation location
Wall mounting: the distance between the gas sensor and the gas equipment or
valve should not be more than 4 meters, the distance from the sensor installation
to the ceiling should be less than 0.3 meters, but do not install the sensor directly
above the gas equipment. Below is a schematic drawing that will help you choose
the right location for the device.
Ceiling installation
The distance between the gas sensor and the gas equipment or valve should not
be more than 4 meters, do not install the sensor directly above the gas equipment.
Below is a schematic drawing that will help you choose the right location for the
device.
1. Power supply for preheating
Before switching on the power, make sure that the power source is operating
properly;
Connect the device to the power supply - the buzzer sounds three times, after
which the red, yellow, green indicator ashes in turn. After about ve minutes,
one long beep will sound, indicating the exit from the preheating mode, the green
indicator will light up.
* When using for the rst time, or if the device has not been used for a long time,
please connect the sensor to the power supply
for 72 hours for further optimal operation of the device.
2. Normal working status
In the absence of malfunctions or an alarm, the green indicator is constantly on;
when the «Sound / Self-diagnosis» button is pressed, the sensor switches to the
self-test mode (once in a row the red, yellow, green indicator ashes, and the
alarm sounds once). After completion of self-diagnosis, the sensor restores normal
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi MiJia Honeywell Gas Leak Detector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi MiJia Honeywell Gas Leak Detector in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info