730156

Xiaomi MiJia Honeywell Gas Leak Detector Manual

2
Zoom out
Zoom in
Previous page
1/6
Next page
Installation
1. Fastening with screws
a) Insert the battery into the battery compartment, press and hold the «Sound /
Self-check» button for 1 second. Make sure that the red-yellow indicator starts
ashing on the device, after which you will hear a corresponding beep.
b) Drill holes in the ceiling with a perforator;
c) Insert the dowels;
d) Using self-tapping screws, attach the mounting plate;
e) Attach the main alarm panel to the mounting panel in accordance with all the
index marks, go clockwise until you hear a characteristic click that indicates the
xation of the device.
Using self-tapping screws, install the mounting plate.
Attach the main alarm panel to the mounting panel in accordance with all the
indicia.
Turn clockwise until it clicks.
2. Mounting with adhesive tape
a) Insert the battery into the battery compartment, press and hold the «Sound /
Self-check» button for 1 second. Make sure that the red-yellow indicator starts
ashing on the device, after which you will hear a corresponding sound signal
b) Remove the protective lm from one side of the adhesive tape and attach it to
the back of the mounting panel;
c) Remove the protective lm from the other side of the adhesive tape and attach
Precautions for installation
a. Install the device in the premises where the gas (methane) is conducted;
b. Avoid places outside the premises;
c. Avoid rooms with a temperature below -10 ° C or above 55 ° C;
d. Avoid places near other devices, that produce hot air, water vapor or soot (for
example, directly above the gas stove);
e. There should be no barrier between the sensor and the gas equipment,
otherwise the sensor will not be able to measure the gas concentration level;
f. Avoid places at the hood, windows, entrance doors and other well-ventilated
places, otherwise the sensor will not have contact with the gas and will not be
able to measure its concentration level;
g. Make sure all sockets are plugged in;
h. It is recommended to perform the installation with screws, in the case of
installation with adhesive tape, unforeseen situations may occur, the user is
responsible for;
i. If installed with adhesive tape, make sure that the selected surface for attaching
the device is smooth, smooth, clean and dry;
j. If installed with adhesive tape, it is necessary to regularly check the reliability of
the fastening to prevent the sensor from falling.
the mounting plate to the ceiling;
d) Attach the main alarm panel to the mounting panel in accordance with all the
reference marks, go clockwise until you hear a characteristic click that indicates
the xation of the device.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi MiJia Honeywell Gas Leak Detector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi MiJia Honeywell Gas Leak Detector in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info