Manual Unold 68415 (page 27 of 136) (English, German, Dutch, French, Spanish)

379790

Zoom out

Zoom in

1/136

1. Prepare the appliance as described in the chapter „Start-up“.

2. Open the lid of the Backmeister

breadmaker and take out

the bread pan.

3. Fill the hole for the kneading blade with heat resistant

margarine in order to prevent the dough from entering and

adhering to it.

4. Put the kneading blade on the drive shaft in the bread pan.

5. Add the ingredients into the bread pan as described in the

corresponding recipe. With thick dough you will achieve best

results changing the order of the ingredients, i.e. adding first

the dry ingredients and then the liquid. Nevertheless, mind

that the yeast does not get in contact with the liquid when

using the time presetting feature.

6. Put the bread pan back into the appliance and turn clockwise

until it latches into position.

7. Close the lid of the Backmeister

breadmaker.

8. Connect the plug of the appliance to the wall socket and

switch the appliance on using the EIN/AUS (I/O) switch.

9. Select the desired programme. You may find the details for the

different programmes from page 28 onwards. For a standard

bread mix you will obtain good results using the programme

„Basis“ for example.

10. Select the desired browning setting (Hell – Mittel – Dunkel)

(Light – Medium – Dark). Please bear in mind that the browning

setting cannot be selected in all baking programmes. You may

find the corresponding details on page 28.

11. Select the desired bread size. Please bear in mind that the

bread size cannot be selected in all baking programmes. You

may find the corresponding details on page 28.

12. After having selected all desired adjustments, push the Start/

Stop button.

13. According to the programme selected a repeated beep can be

heard during the second kneading process. Now you may open

the lid and add the desired ingredients like nuts to the dough.

Close the lid afterwards.

14. The Backmeister

breadmaker emits a repeated beep when

your bread is ready and can be taken out. If you want to take

the bread out before the temperature maintenance time is

over, push the Start/Stop button and keep it pressed shortly

until the interruption of the programme is confirmed with a

beep.

15. Carefully take out the bread pan. In order to avoid burns,

please use adequate pot holders. Turn the bread pan upside-

down and let the bread slip onto a cake cooler to cool down. If

the bread does not slip out immediately onto the cake cooler,

move the kneading drive slightly from one side to another

from the bottom until the bread comes out. Please remember

that the kneading drive may still be hot and use adequate pot

holders. Never knock the bread pan on an edge or the working

plate, as this may deform the bread pan.

16. If the kneader sticks to the bread, it may be loosened with the

provided hook. Insert the hook on the bottom side of the warm

bread in the opening of the kneader and twist it at the bottom

rim of the kneader where the blade is. Then pull the kneader

carefully upwards using the hook. This allows you to see where

the blade of the kneader is inside the bread and pull it out.

17. Clean the bread pan afterwards as described on page 30.

START-UP

1. Please check, if all parts and accessories are complete and

faultless.

2. Before using the machine for the first time, remove all packing

materials ans loose parts from the inside.

3. Wipe the bread pans of the Backmeister

with warm water and

a mild detergent and clean the kneading blades.

4. Wipe the exterior of the appliance with a damp cloth. Do not

immerse the appliance into water.

5. Dry all parts thoroughly. Place the bread pan into the

machine.

6. Put the plug into a power socket. The breadmaker is now ready

for operation and can be programmed.

7. During the first operation cycle, steam may be produced. We

recommend to use the appliance for the first time with only

the bread pan inserted (no kneading blades, no ingredients) in

the program BAKING POWDER. Afterwards let the appliance

cool down.

8. Now your breadmaker is ready for baking the first bread.

QUICK GUIDE – THE FIRST BREAD

25. Check the appliance, the wall socket and the lead cable

regularly for wear or damage. In case the lead cable or other

parts appear damaged, please send the appliance or the base

to our after sales service for inspection and repair (for address,

see warranty terms). Unauthorised repairs can constitute

serious risks for the user and void the warranty.

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if repairs are carried out by unauthorized

third parties.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 68415 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 68415 Manual

Product: