576540

Ultimate speed ULGD 3.8 A1 - IAN 92517 Manual

39
Zoom out
Zoom in
Previous page
1/41
Next page
39 GB
Operation / Maintenance and careOperation
is fully charged, the condition display
8
shows
4 bars. The flashing stops and the appliance
automatically switches to retention charge.
Programme 2 „12 V“
(14.4 V / 0.8 A)
For charging 12 V batteries with a capacity of less
than 14 Ah.
Press the programme selection button
10
, to
select programme 2. The symbol
is dis-
played on the LCD. During charging, the charge
display
7
flashes and shows the progress of
the charge procedure (1–4 bars). When the
battery is fully charged, the condition display
8
shows 4 bars. The flashing stops and the appli-
ance automatically switches to retention charge.
Programme 3 „12 V“
(14.4 V / 3.8 A)
For charging 12 V batteries with a capacity of be-
tween 14 Ah–120 Ah.
Press the programme selection button
10
, to se-
lect programme 3. The symbol
is displayed
on the LCD. During charging, the charge dis-
play
7
flashes and shows the progress of the
charge procedure (1–4 bars). When the battery
is fully charged, the condition display
8
shows
4 bars. The flashing stops and the appliance
automatically switches to retention charge.
Programme 4 „12 V“
(14.7 V / 3.8 A)
For charging 12 V batteries with a capacity of be-
tween 14 Ah–120 Ah under cold conditions or for
charging AGM batteries.
Press the programme selection button
10
, to
select programme 4.
NOTE: This programme may start with a minute
delay. The symbol
is displayed on the LCD.
During charging, the charge display
7
flashes
and shows the progress of the charge proced
ure
(1–4 bars). When the battery is fully charged,
the condition display
8
shows 4 bars. The
flashing stops and the appliance automatically
switches to retention charge.
Retention charge
As described under programmes, this appliance
features the automatic retention charge. Depending
on the voltage drop of the battery, caused by self-
discharge, the appliance reacts with different charge
currents.
The battery can remain connected to the charger
for longer periods of time.
Appliance protection function
The charger switches the electronics off and switches
the system instantly to the basic setting, as soon as
there is an abnormal situation, such as short circuit,
critical voltage drop during charging, broken circuit
or swapped connection of the connector clamps is
detected.
Should the appliance become too hot during charg-
ing, the output current is automatically reduced.
This protects the appliance from damage.
Maintenance and care
Before you carry out any work
on the battery charger always pull the mains
plug out of the mains socket.
The appliance is maintenance-free.
Do not under any circum-stances use solvents
or other aggressive cleaning agents.
Clean the plastic surfaces of the device with
a dry cloth.
… 39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed ULGD 3.8 A1 - IAN 92517 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULGD 3.8 A1 - IAN 92517 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info