If Dynamic IP is selected, the Router gets the IP address
automatically from the DHCP server or the ISP. No
conguration should be set and you can go on with the
wireless conguration.
b)
If PPPoE is selected, please enter the User Name and
Password given by your ISP. These elds are
case-sensitive. Then click Next.
a)
3
1
Click Survey button to find the available wireless
networks.
3
The target network‘s SSID will be automatically lled into
the wireless setting page. Select the Security Mode and
enter the Password. Then click Next.
2
Select the SSID of the target network and click Connect.
4
Click Reboot to reboot the Router and make the settings
take eect.
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless
Security is enabled, you need to enter the password you’ve
just set to sucessfully nish the connecting.
Repeater/Client Mode
www.tp-link.com
TP-LINK TECHNOLOGIES CO., LTD.
Access Point Mode
1
Set the wireless parameters. It’s recommended that you rename
anSSID, choose aSecurity Mode and enter a Password.
2
Click Reboot to reboot the Router and make the settings take
eect.
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless Security
is enabled, you need to enter the password you’ve just set to
sucessfully nish the connecting.
AppendixTroubleshooting
How can I restore my Router’s conguration to its
factory default settings?
With the Router powered on, use a pin to press and hold the
Reset button for about 5 seconds before releasing it.
What can I do if I forget my password?
3)
2)
1) Restore the Router’s conguration to its factory default
settings. If you don’t know how to do that, please refer
to How can I restore my Router’s conguration to its
factory default settings?
Try to congure your Router once again by following
the instructions in the previous steps of the QIG.
1
2
For more advanced settings, please refer to the User
Guide in the Resource CD.
USB Features Introduction and Application
To log in the Web Management page, use the default
user name and password: admin, admin.
To connect to the Wireless Network, use the default
password on the label.
Router Configuration
Wireless Router Mode
1
Choose your WAN Connection Type and click
Next to
continue
.
If Dynamic IP is selected, the Router gets the IP address
automatically from the DHCP server or the ISP. No
conguration is needed and you can go on with the wireless
conguration.
c)
If Static IP is selected, please enter the IP Address and
Subnet Mask given by your ISP. Then click Next.
d)
If PPPoE is selected, please enter the User Name and
Password given by your ISP. These elds are case-sensitive.
Then click Next.
3
Click Reboot to reboot the Router and make the settings take
eect.
If you don't know the connection type your ISP provides,
you can choose Auto-Detect to allow the Quick Setup to
search your Internet connection for servers and protocols
and determine your ISP conguration. Make sure the cable
is securely plugged into the WAN port before detection.
b)
2
Set the wireless parameters. It’s recommended that you
rename anSSID, choose aSecurity Type and enter a
Password. Then click Next.
Repeater Mode and Client Mode conguration are quite familiar, except you can choose Universal or WDS in Repeater Mode. Here we take Repeater Mode as an example.)
Choose your WAN Connection Type and click
Next to
continue
.
1
c)
If Static IP is selected, please enter the IP Address,
Subnet Mask, Default Gateway and Primary DNS given
by your ISP. Then click Next.
2
Click Suvery buttonto nd the available wireless networks. Select the SSID of the target network and click Connect.
Then the SSID and BSSID will be automaticlly lled into
the wireless setting gure. Select the Key type and enter
the Password. Then click Next.
Click Reboot to reboot the Router and make the settings
take eect.
5
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless Security
is enabled, you need to enter the password you’ve just set to
sucessfully nish the connecting.
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless Security
is enabled, you need to enter the password you’ve just set to
sucessfully nish the connecting.
The USB port on the TL-WR710N can be used to share your file,
media, storage, and space across your local network.
Scan the QR code to access the
Application Guide for USB features.
http://www.tp-link.com/app/usb
Local Storage Sharing
Media Sharing
Technical Support
For all other technical support, please contact us by using the following details:
Global
Tel: +86 755 2650 4400
E-mail: support@tp-link.com
Service time: 24hrs, 7 days a week
Singapore
Tel: +65 6284 0493
E-mail: support.sg@tp-link.com
Service time: 24hrs, 7 days a week
Germany / Austria
Tel :+49 1805 875 465 (German Service)
+49 1805 TPLINK
+43 820 820 360
E-mail: support.de@tp-link.com
Fee: 0.14 EUR/min from the German
xed phone network and up to 0.42EUR/min
from mobile phone.
Service Time: Monday to Friday, 09:00 to 12:30
and 13:30 to 17:30. GMT+1 or GMT+2
(Daylight Saving Time in Germany)
* Except bank holidays in Hesse
USA/Canada
Toll Free: +1 866 225 8139
E-mail: support.usa@tp-link.com
Service time: 24hrs, 7days a week
Australia/New Zealand
Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: support.au@tp-link.com (Australia)
support.nz@tp-link.com (New Zealand)
Service time: 24hrs, 7 days a week
For more troubleshooting help, go to
http://www.tp-link.com/en/support/faq
To download the latest Firmware, Driver, Utility and User Guide, go to
http://www.tp-link.com/en/support/download
France
Tel: +33 (0) 820 800 860 (French service)
Email: support.fr@tp-link.com
Fee: 0.118 EUR/min from France
Service time: Monday to Friday, 09:00 to
18:00 *Except French Bank holidays
132
Choose the Working Mode you need, and then click Next.
Open a Web browser, type http://tplinklogin.net in the
address eld, and press Enter. At the prompt, enter the
default User Name and Password: admin, both in lower
case letters. Click OK.
After a successful login, you can click the Quick Setup
menu to quickly congure your Router. Click Next.
4
Congure the Wireless Settings according to the mode you choose.
(TL-WR710N supports five working modes, including Wireless
Router, Access Point, Repeater, Client and WISP Client Router . )
The USB port on the TL-WR710N can be used for mobile device
charging.
Mobile Device Charging
Storage Sharingand Media Server
Charging
For more details about the USB Features and Settings, please refer to the User Guide on the Resource CD.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for TP-LINK TL-WR710N at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of TP-LINK TL-WR710N in the language / languages: English as an attachment in your email.
The manual is 2,19 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
