485507
1
Zoom out
Zoom in
Previous page
1/2
Next page
Refer to the following scenarios to determine an appropriate operation mode.
Portable 3G/4G Wireless N Router
Quick Installation Guide
7106507339 REV3.0.0
Determine Operation Mode
Configure the Router
3G/4G Router
3G/4G
3G/4G Router I want to share the 3G/4G network with my local devices.
ScenarioOperation ModeMode Switch
I want to have internet access from a wireless internet service
provider (WISP), and share the internet with local devices.
I want to access the internet wirelessly, but only a wired
network is available.
I want to extend my existing wireless network and connect a
wired-only device to the internet.
WISP Client Router
Access Point
Repeater/Bridge
WISP
AP
If you have changed the default SSID and password, you have to
reconnect your wireless devices to the new Wi-Fi network.
1 Switch the operation mode to 3G/4G and connect the
hardware according to the left diagram.
2 Connect your device to the router wirelessly. The SSID
(wireless network name) and password are on the router’s
label.
3 Enter http://tplinkwifi.net in a web browser and create a
password for future logins.
4 Go to Quick Setup, select your Time Zone and click Next.
Select 3G/4G Router Mode and click Next.
Note: For details about other modes, please refer to the User Guide at
www.tp-link.com.
5 Select your Mobile ISP or manually set them if your ISP is
not listed. Then click Next.
6 Either customize your Network Name (SSID) and
Password or keep the default ones, and then click Next.
7 Click Finish to apply the configuration.
A
B
C
3G/4G USB Modem
TL-MR3020
Access Point
1 Switch the operation mode to AP and connect the hardware
according to the left diagram.
2 Connect your device to the router wirelessly. The SSID
(wireless network name) and password are on the router’s
label.
3 Enter http://tplinkwifi.net in a web browser and create a
password for future logins.
4 Select your Time Zone and click Next.
5 Select Access Point Mode and click Next.
6 Either customize your Network Name (SSID) and Password
or keep the default ones, and then click Next.
7 Click Finish to apply the configuration.
If you have changed the default SSID and password, you have to
reconnect your wireless devices to the new Wi-Fi network.
B
C
D
A
Wired Router
Internet
Repeater/Bridge
1 Switch the operation mode to AP and connect the hardware
according to the left diagram.
2 Connect your device to the router wirelessly or via an
Ethernet cable. The SSID (wireless network name) and
password are on the router’s label.
3 Enter http://tplinkwifi.net in a web browser and create a
password for future logins.
4 Select your Time Zone and click Next.
5 Select Repeater/Bridge Mode and click Next.
6 Click Scan to find the network you want to extend. Enter the
Password for the selected wireless network if it is encrypted.
7 Either customize your Network Name (SSID) and Password
or keep the default ones, and then click Next.
8 Click Save to apply the configuration .
9 Relocate the router about halfway between your host router
and the Wi-Fi dead zone.
If you have changed the default SSID and password, you have to
reconnect your wireless devices to the new Wi-Fi network.
Host Router
Internet
A
B
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-MR3020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-MR3020 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-MR3020

TP-LINK TL-MR3020 User Manual - English - 258 pages

TP-LINK TL-MR3020 Quick start guide - All languages - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info