562331

Techno line WS7079S Manual

6
Zoom out
Zoom in
Previous page
1/7
Next page
TOGGLING AND RESETTING THE INDOOR RECORDINGS
1. To toggle between the indoor current, minimum and maximum temperature
and humidity data and the times at which they were recorded, press the IN
key:
Once to show the minimum temperature and humidity values with time and
date recorded
Twice to show the maximum temperature and humidity values with time
and date recorded
Three times to return to the current time, date, temperature and humidity
levels.
Note: the Time/date information is only available for the MIN/MAX
temperature data.
2. To reset the minimum and maximum temperature and humidity data and
the times at which they were recorded, press the IN key continuously for
about 3 seconds. This will reset all minimum and maximum data recorded
to the current time, date, temperature and humidity. The min/max
temperatures and humidity recorded are of current time and they remain
unaffected by the time zone setting.
OUTDOOR TEMPERATURE
The fifth LCD section shows the outdoor temperature and a reception signal. A
number beside the temperature will also show if more than one transmitter is
used.
TOGGLING AND RESETTING THE OUTDOOR RECORDINGS:
1. To toggle between the outdoor current, minimum and maximum
temperature data and the times at which they were recorded, press the
OUT key:
Once to show the minimum temperature value with time and date recorded
Twice to show the maximum temperature value with time and date
recorded
Three times to return to the current time, date and temperature level
2. To toggle between transmitters, press the CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
Note: The transmitter number will only be displayed if there is more than
one transmitter detected.
3. To reset the minimum and maximum outdoor temperature data and the
times at which they were recorded, press the OUT key continuously for
about 3 seconds. This will reset all minimum and maximum data recorded
to the current time, date and temperature. The min/max temperatures
recorded are of current time and they remain unaffected by the time zone
setting.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
TEMPERATURE TRANSMITTER
The outdoor temperature is measured and transmitted every 60 seconds.
The range of the Temperature transmitter may be affected by the temperature. At
cold temperatures the transmitting distance may be decreased. Please bear this
in mind when placing the transmitter.
433 MHz RECEPTION:
The Weather station should receive the temperature data within 15 minutes after
set-up. If the temperature data is not being received 15 minutes after setting up
(the display shows “---”), then please check the following points:
1. The distance of the Weather Station or transmitter should be at least 1.5
to 2 meters away from any interfering sources such as computer monitors
or TV sets.
2. Avoid placing the receiver onto or in the immediate proximity of metal
window frames.
Maximum Display
Outdoor reception
signal
3. Using other electrical products such as headphones or speakers operating
on the same signal frequency (433MHz) may prevent correct signal
transmission and reception.
Outdoor
Temperature
in °C or °F
Number showing
the transmitter unit
(only if there is
more than one
transmitter)
4. Neighbors using electrical devices operating on the 433 MHz signal
frequency can also cause interference.
Note:
When the 433MHz signal is received correctly, do not re-open the battery covers
of either the transmitter or Weather Station, as the batteries may spring free from
the contacts and force a false reset. Should this happen accidentally then reset all
units (see Setting up above) otherwise transmission problems may occur.
The transmission range is about 25 m from the transmitter to the Weather Station
(in open space). However, this depends on the surrounding environment and
interference levels. If no reception is possible despite the observation of these
factors, all system units have to be reset (see Setting up).
POSITIONING THE WEATHER STATION
The Weather Station comes attached with a removable table
stand, which provides the option of table standing or wall
mounting the unit. Before wall mounting, please check that the
outdoor temperature can be received from the desired locations.
To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the
head extended out by about 5mm.
2. Remove the stand from the Weather Station by pulling it
away from the base and hang the station onto the screw.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS7079S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS7079S in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info