562331
4
Zoom out
Zoom in
Previous page
1/7
Next page
Flashing
TIME RECEPTION ON/OFF SETTING
In area where reception of the DCF-77 time is not possible, the DCF-77 time
reception function can be turned OFF. The clock will then work as a normal
Quartz clock. (Default setting is ON).
1. The digit “ON” will start flashing on the LCD.
2. Use the IN key to turn OFF the time reception function.
3. Confirm with the SET key and enter the “12/24-Hour Display setting” or
exit the setting mode by pressing the CH key
Note:
If the Time Reception function is turned OFF manually, the clock will not
attempt any reception of the DCF time as long as the Time Reception OFF
function is activated. The Time Reception icon will not be displayed on the
LCD.
12/24 HOUR TIME DISPLAY SETTING
1. After setting time reception ON/OFF, press the SET key, “12h” or “24h”
flashes in the LCD.
2. ess the IN key to select the “12h” or “24h” display mode. Pr
U
Pr
3. Press the SET again to confirm and to enter the “Manual Time setting” or
exit the setting mode by pressing the CH key
Note: When 24h mode display is selected, the calendar format will be date and
month display.
When 12h mode display is selected, the calendar format will be month and
date display.
MANUAL TIME SETTING
In case the Weather Station is not able to detect the DCF-signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work
as a normal Quartz clock.
To set the clock:
1. The hour and minutes digits start flashing in the time display section.
2. se the IN key to adjust the hours and the OUT key to adjust the minutes.
If you hold the key while you adjust, the hours move 1 hour and the
minutes move 5 minutes.
3. Confirm with the SET key and enter the “Calendar Setting” or exit the
setting mode by pressing the CH key
Note:
The unit will still try to receive the signal at each full hour despite it being manually
set. When it does receive the signal, it will change the manually set time into the
received time. During reception attempts the DCF tower icon will flash. If
reception has been unsuccessful, then the DCF tower icon will not appear but
reception will still be attempted the following hour.
CALENDAR SETTING:
Year (flashing) Date (flashing) Month (flashing)
The date default of the Weather station is 1. 1. of the year 2003. Once the radio-
controlled time signals are received, the date is automatically updated. However,
if the signals are not received, the date can also be set manually. To do this:
U1. sing the IN key, set the year required. The range runs from 2003 to 2039
(default is 2003).
2. Press the SET key to enter the month and date setting mode.
3. ess the IN (or OUT) key to set the date and the OUT (or IN) key to set
the month required.
4. Confirm with the SET key and enter the “Snooze setting ” or exit the
setting mode by pressing the CH key.
SNOOZE SETTING
Important:
The snooze setting in this Weather Station will not have any effect in this
unit performance. This feature is only available in enhance model with alarm
function. Simply press the SET key to skip this setting and enter the “°C/°F
setting” or exit the setting mode by pressing the CH key.
°C/°F SETTING:
The default temperature reading is set to °C (degree Celsius). To select °F
(degree Fahrenheit):
1. The “°C” will be flashing, use the IN key to toggle between “°C” and “°F”.
Flashing
Minutes
(flashing)
Hours
(flashing)
Flashing
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS7079S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS7079S in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info