562331
2
Zoom out
Zoom in
Previous page
1/7
Next page
7. If after 10 minutes the DCF time has not been received, use the SET key to
manually enter a time initially. The clock will automatically attempt to
receive the DCF time at each full hour. When this is successful, the
received time will override the manually set time. The date is also updated
with the received time (Please refer also to notes on “Radio controlled
time” and “Manual time setting”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER
STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V
batteries. When batteries need to be replaced, the
low battery symbol will appear on the LCD. To
install and replace the batteries, please follow the
steps below:
1. Insert finger or other solid object in the space
at the bottom center of the battery
compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity.
(see marking).
3. Replace compartment cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AAA, IEC, LR3, 1.5V batteries. To install
and replace the batteries, please follow the steps below:
1. Remove the cover.
2. Insert the batteries, observing the
correct polarity (see marking).
3. Replace the battery cover on the unit.
Note:
In the event of changing batteries in any of the units, all units need to be reset by
following the setting up procedures. This is because a random security code is
assigned by the transmitter at start-up and this code must be received and stored
by the Weather Station in the first three minutes of power being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to
ensure optimum accuracy of these units.
Please participate in the preservation of the environment.
Return used batteries to an authorised depot.
FUNCTION KEYS:
WEATHER STATION:
The weather station has four easy to use function keys.
Indoor Outdoor
Channel
Setting
SET key (Setting)
Used to enter the set mode for the following functions: LCD contrast, Time
zone, Time Reception ON/OFF, 12/24 hour display, Manual time, Year,
Date, °C/°F, and Weather forecasting icon sensitivity settings.
The year can only be displayed in the set mode (not displayed in normal
mode)
IN key (Indoor)
Used to toggle between the current/ minimum / maximum indoor
temperature and humidity
Press for over 3 seconds to reset the indoor maximum and minimum
temperature and humidity records (will reset all records to current level)
Note: the Time/date information is only available for MIN/MAX temperature
data, and will be changed to default time after the reset operation
Change LCD contrast, time zone, Time Reception ON/OFF, 12/24 hour
display, hour, year, month, day, °C/°F and weather forecasting icon
sensitivity units in setting modes
Note: in 24hr time display mode, the day is set by using the IN key. In 12hr
time display mode, the month is set by using the IN key
OUT key (Outdoor)
Used to toggle between the current / minimum / maximum outdoor
temperature
Press for around 3 seconds to reset the outdoor maximum and minimum
temperature records (will reset all temperatures to current level of the
relative transmitter being reset - each transmitter’s data must be reset
separately)
Note: the time/date information of MIN/MAX data will be reset to default
time as well.
Change minute, month, day in setting modes
Note: in 24hr time display mode, the month is set by using the OUT key. In
12hr time display mode, the day is set by using the OUT key
CH key (Channel)
Toggle between the outdoor Temperature Transmitters 1, 2 and 3 (if more
than 1 transmitter is used)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS7079S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS7079S in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info