751645
25
Zoom out
Zoom in
Previous page
1/28
Next page
Country Settings: Select your region.
Antenna Power: Set to On if you use an active antenna. When set to On, 5 V will be present at
the ANT IN connector of the receiver. Select Off for passive antennas.
LCN: Set LCN (Logical Channel Numbering) to On to activate operator defined
channel numbering or Off to store channels in found order. Sorting of
channels in the channel list with LCN is not possible.
Auto Scan: Select to start searching all frequencies for available channels. All stored
channel from before will be deleted.
Manual Scan: Select to start searching on one frequency for available channels. All stored
channel from before will be kept in the channel list. When all settings have
been made, press OK to start scanning.
Scan Type: Select FTA to search and store channels which can be watched freely. Select
All to include encrypted channels in the channel list. However this device
does not decode any channels.
7.5.3 DVB-C Installation
For cable installation select DVB-C in the DTV tuner section. If you don’t make that selection the DVB-T
menu options will be displayed. The process of auto search and manual search works in the same way as
described in the DVB-T chapter above.
7.6 Electronic Programme Guide (EPG)
The Electronic Programme Guide (EPG) shows programme schedules and information for current
programmes and coming programmes up to the 7 next days. Press EPG button on remote to open the
EPG in viewing mode. To change to other channel, press the RED and GREEN buttons. Press t upq to
navigate in the EPG menu. Press OK to get detailed information about the programme. Press the BLUE
Timer button to set a reminder for a programme or to programme a recording.
8.0 TROUBLESHOOTING
There may be many reasons that affect the correct operation of your Android receiver. If the receiver
does not work as you expect, please follow the steps outlined below. If after performing these operations
the receiver still does not work well, contact your dealer or service centre in your area or write an email to
our support via our website www.strong.tv.
If the DTV part shows problems with reception, first check if all cables and connectors still are in good
condition. Check whether your dish/antenna still is fixed well and pointed optimally to the satellite of
your choice. Check whether the satellite settings in the menus are still correct. If all is OK, you can reset
the unit back to the factory settings and try to install again. Refer to chapter 7.3.7 of this user manual.
If you experience problems in the Android part, first check whether it is caused by an application. Try
to clear the data or remove the app and check if this solves the problem. Please enter Settings – Apps --
(select the app) -- Clear data and then return to the menu and test if all works again.
If not successful you can reset the receiver back to the factory settings and try to install it again. Refer to
chapter 6.5 of this user manual.
WARNING: Do not open the receiver cover. This action will damage the warranty seals
and warranty repairs will be denied.
21
English
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 2402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 2402 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 2402

Strong SRT 2402 User Manual - German - 32 pages

Strong SRT 2402 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info