751645
24
Zoom out
Zoom in
Previous page
1/28
Next page
7.5.1 Satellite Installation
In this menu below you will find level and quality bars to optimize the signals for your dish.
Use p/q to select one or more satellites. Press OK to mark or unmark them. As soon as you have made
your selection, press u to jump to the right side of the screen where you can select a satellite and add
the corresponding settings as DiSEqC ports.
By the end of the setup you can start the scan process by pressing the BLUE and Scan button.
SAT Select a satellite with t u. If you only mark one satellite you cannot select
another.
TP Select a transponder if you want to scan or adjust the dish on a selected
frequency. Press OK to call the overview list.
LNB type Default is set to 9750/10600 which is the most common setting for LNBs
(Universal type). Select another if you are using a different type LNB which
needs other values.
LNB voltage Select On to increase the LNB voltage if you use a long coaxial cable to
compensate for decrease of the LNB supply voltage.
SatCR Select one of the frequencies if you are connected to a SatCR system. SatCR is
a special system which mainly is used in apartment buildings to provide one
satellite dish system to many users at once. To use this function, contact your
property management or system installer. If SatCR is activated, other settings
below are not used. For normal use, default is set to Off.
LNB Power Default is set to 13/18V. The others functions are intended for specialized staff
only.
22KHz Select Off or On if you use a special dish setup. For normal use this is default
set to Auto.
ToneBurst If you are using a legacy type switch to switch between 2 satellites, setup your
port to the satellite you selected above.
DiSEqC 1.0 If you are using a DiSEqC 1.0 switch to switch between 2, 3 or 4 satellites,
setup your port to the satellite you have selected above.
DiSEqC 1.1 If you are using a DiSEqC 1.1 to switch between 5 to 16 satellites, setup your
port to the satellite you’ve selected above.
Motor If you are using a motor drive to move between satellites, setup the motor
drive by using DiSEqC 1.2 or DiSEqC 1.3 protocols.
NOTE: We strongly advise to ask your local installer to help install motor and
settings.
There is also the possibility to change (add, edit or delete) a satellite or transponder by pressing INFO
and search for channels: Auto search, Manual search, Blind scan and Network search. Press the BLUE
button to display the Scan menu and press OK to confirm.
7.5.2 DVB-T/T2 Installation
In this menu you can select Country, Antenna power, LCN modes and search for channels.
Below in the screen you will find level and quality bars for optimizing the best signals of your terrestrial
antenna.
20
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 2402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 2402 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 2402

Strong SRT 2402 User Manual - German - 32 pages

Strong SRT 2402 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info