Manual Stiga SHT 700 (page 23 of 138) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

608751

Zoom out

Zoom in

1/138

HOW TO START - STOP THE MOTOR /USING THE MACHINE 7

Both switches must be en-

abled in order to switch the motor on and keep it run-

ning. The motor will stop if either switch is released.

STOPPING THE MOTOR (Fig. 1)

To stop the motor:

– Release the switches (5) and (6).

– FIRST unplug the extension lead (3) from the

mains socket (4) and THEN disconnect the

power cable (2) of the machine from the exten-

sion lead (3).

When the motor is switched

off, a few sparks may be seen near the ventilation

slots; this is perfectly normal and does not damage

the tool in any manner.

NOTE

STARTING THE MOTOR (Fig. 1)

Before starting the motor:

– Press the upper part of the catch found in the rear

handgrip and insert the power lead (1) so that it

fastens to the cable clamp.

– FIRST connect the power cable plug (2) to the ex-

tension lead (3) and THEN plug the extension lead

into the mains socket (4).

– Remove the blade protection devices.

– Make sure the blade is not touching the ground

or any other object.

– Make sure that the front handgrip is locked in

the centre position.

To start the motor:

1. Hold the machine firmly with both hands.

2. Rotate the handle of the safety switch (5 – located

in the front handgrip) and press the switch (6).

6. HOW TO START - STOP THE MOTOR

For your safety and that

of others:

1) Do not use the machine without having

read the instructions carefully. Become

acquainted with the controls and the pro-

per use of the machine. Learn how to stop

the motor quickly.

2) Only use the machine for its intended use,

that is “the cutting and trimming of hedges,

consisting in plants with small sized

branches”. Any other use may be danger-

ous and severly damage the machine. Ex-

amples of improper use may include, but

are not limited to:

– general grass cutting and in particular,

near kerbs;

– chopping material for composts;

– pruning;

– using the machine for cutting non-plant

material;

– use of the machine by more than one

person.

3) Residual risks: even all the safety rule are

obeyed, there still can be a certain resid-

ual risk, which cannot be excluded. From

the kind and construction of the tool the

WARNING!

foreseeable potential endangerments can

be:

– Contact with the unprotected cutting

teeth.

– Involve fingers or hands into the moving

cutting blade.

– Unexpected, sudden movement of the

cutting blade.

– Thrown away of chips, it may damage

your eyes.

– Damage of the hearing, if no protection

of the ears is carried.s

4) Keep in mind that the operator or user is

responsible for accidents or hazards oc-

curring to other people or their property.

5) Always wear suitable clothing when using

the machine. Your dealer can provide you

with all the information on the most suit-

able accident-prevention devices to guar-

antee your safety.

6) Mow only in daylight or good artificial

light.

7) Thoroughly inspect the whole work area

and remove anything that could be thrown

up by the machine or damage the cutting

device (branches, iron wire, hidden

wiring, etc.).

7. USING THE MACHINE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 700 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 700 Manual

Product: