Manual Stiga SHT 700 (page 25 of 138) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

608751

Zoom out

Zoom in

1/138

USING THE MACHINE / MAINTENANCE AND STORAGE 9

For your safety and that

of others:

– After each use, disconnect the machine

from the mains and check for damage.

– Correct maintenance is essential to maintain

the original efficiency and safety of the ma-

chine over time.

– Keep all nuts, bolts and screws tight to be

sure the equipment is in safe working con-

dition.

– Never use the machine with worn or dam-

aged parts. Damaged parts are to be re-

placed and never repaired.

– Only use original spare parts. Parts that are

not of the same quality can seriously dam-

age the equipment and compromise safety.

During maintenance oper-

ations unplug the machine from the mains.

1. MOTOR COOLING

To avoid overheating and damage to the motor, al-

ways keep the cooling air vents clean and free of

sawdust and debris.

WARNING!

2. MAINTENANCE AND SHARPENING

OF THE BLADE

Periodically check that the

blades are not bent or damaged and that the

fixed comb on the blade is intact.

Adjustment of the distance between blades is not

necessary, as this is predetermined by the manu-

facturer.

If the blades are used correctly, following all the in-

structions provided, they will not require any main-

tenance work and will not need sharpening.

It is necessary to sharpen the blades only when the

trimming performance decreases and the branches

tend to stick together.

Any intervention on the blade

should always be conducted at a specialised Cen-

tre that has the most appropriate tools and is able

to perform the operations without compromising the

safety of the machine.

NOTE

WARNING!

8. MAINTENANCE AND STORAGE

• Vertical trimming (Fig. 3)

Proceed to cut by using curved movements from

the bottom towards the top, keeping the blade as

far from the body as possible.

• Horizontal trimming (Fig. 4)

The best results will be obtained with the blade

slightly inclined (5° - 10°) in the direction you are

cutting, proceed with a curved movement, slowly

and without interruptions, especially in the case of

very thick hedges.

4. LUBRICATING THE BLADES DURING

JOBS (Fig. 5)

If the trimming device overheats whilst working, it

is necessary to lubricate the internal surfaces of the

blades.

This operation must only

be performed when the blades have stopped

running and the motor is switched off.

WARNING!

4. END OF OPERATIONS

When you have finished your work:

– Switch off the motor as indicated above (Chap.

6).

Allow the motor to cool

before storing in any enclosure.

To reduce fire hazards, clean the machine

thoroughly to get rid of any remains of grass,

leaves or excess grease, never leave contain-

ers with the cut debris inside the storage area.

To increase the efficiency and working life of the

blades, clean and lubricate them carefully after

each work session.

– Use a soft cloth to clean the blades, along with

a brush to remove more difficult dirt and debris.

– Lubricate the blades with suitable, non-polluting

oil were possible.

WARNING!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 700 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 700 Manual

Product: