Manual Stiga SHT 700 (page 22 of 138) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

608751

Zoom out

Zoom in

1/138

Remove the machine from its packaging, taking

care to gather all the machine contents and docu-

ments.

Unpacking and complet-

ing the assembly should be done on a flat and

stable surface, with enough space for moving

the machine and its packaging, always making

use of suitable equipment.

WARNING!

Disposal of the packaging should be done in ac-

cordance with the local regulations in force.

6 REMOVAL FROM PACKAGING / PREPARING TO WORK

4. REMOVAL FROM PACKAGING

1. CHECKING THE MACHINE

Make sure the machine is

not plugged into the mains socket.

Before starting work please:

– check that the mains frequency and voltage is

the same as the rating data on the “Identification

Plate” (see chap. 1 - 8.8).

– check that the switch lever and the safety switch

handle move freely without forcing and return au-

tomatically and rapidly back to their neutral po-

sition;

– check that the cooling air vents are not ob-

structed;

– check that the power cable and extension lead

are not damaged;

– check that handgrips and protection devices are

clean and dry, correctly mounted and well fas-

tened to the machine;

– check that the cutting devices and guards are not

damaged;

– check that the machine is not showing signs of

wear or damage due to knocks or other causes,

and carry out the necessary repairs.

WARNING!

2. ELECTRICAL CONNECTIONS

Electricity and moisture

are not compatible.

– Always handle and connect electric cables

in dry conditions.

– Keep electric sockets or cables away from

wet and damp areas (e.g. puddles or wet

ground).

– Power the machine using a residual current

device (RCD Residual Current Device) with

max. 30 mA tripping current.

The quality of the extension leads must be no less

than H07RN-F or H07VV-F, with a minimum sec-

tion of 1.5 mm and a recommended maximum

length of 30 m.

To avoid overheating, do not keep the extension

lead rolled up during use.

The permanent connec-

tion of any electrical equipment to the mains of

a building must be installed by a qualified

electrician in conformity with the regulations in

force. Incorrect wiring can cause serious in-

jury and even death.

DANGER!

5. PREPARING TO WORK

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 700 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 700 Manual

Product: