562241

Soundmaster UR2010 Manual

6
Zoom out
Zoom in
Previous page
1/7
Next page
When alarm is active
• When the real time clock matches with the alarm which has been enabled, alarm
becomes active.
• As the alarm becomes active, the Cooking timer, if exists, is terminated
immediately.
• If Beep sound alarm is selected,
1) Sound of beep toggles at the Speaker
2) Muted Radio even radio ON
3) The duration of alarm is 10 minutes
• If Radio alarm is selected,
1) RADIO ON
2) the duration of the alarm is 60 minutes
• To terminate the currently active alarm, press the corresponding key <ALARM1>
or <ALARM2>.
Radio reception
• Press <POWER> once, the station frequency or the station name show on LCD.
• If RDS information is transmitted by the station current set, “ ”
appears in the display and after short time the station name appears in place of
the frequency.
Recall radio preset memory
• There are 10 preset memory stations for the radio.
• When the radio is ON, press <M1/M6> once. ‘MEM’ goes solid; the frequency of
the memory-1 goes solid in the LCD. Press again <M1/M6> to select the preset
memory-6.
• Similar to <M1/M6>, press <M2/M7>, <M3/M8>, <M4/M9> or <M5/M10> to
select the desired preset memory station.
• When new preset memory key is pressed, MUTE is active. When keying the
preset memory has been released for 1 second, the selection of preset memory
is considered as valid and the radio will be tuned to that frequency immediately
with MUTE idle.
• At any time, press other key to start its corresponding function.
Store into memory
• To store the tuning frequency of radio station being received into any of the
preset memory, press <MEM> once. The ‘MEM’ goes flashing.
• Select the desired memory station by pressing the corresponding key until its
number goes solid above ‘MEM’.
• Press <MEM> again to confirm the process of storing. Then, ‘MEM’ goes solid.
• When ‘MEM’ is flashing, pressing <UP>, <DOWN> or <M/ SCAN> will search up,
search down and memory scan with the ‘MEM’ cleared.
• Press other key to start its corresponding function.
Search Up/Down
• When the radio is ON, press <UP> once to change the receiving frequency up by
1 step (50kHz).
• Press <DOWN> once to change the receiving frequency down by 1 step
(50kHz).
• Press and hold <UP> to search the next radio station by moving the receiving
frequency up.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR2010 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster UR2010

Soundmaster UR2010 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info