562241
5
Zoom out
Zoom in
Previous page
1/7
Next page
Similar to <M1>, press <M2>, <M3>, <M4> or <M5> to select the desired preset
memory value.
Press <UP> or <DOWN> to adjust the value (from 1 minute to 23hours and
59minute), press <TIMER> to start the cooking timer and the current value will
store in to memory automatically.
Press < TIMER > again to pause the timer. To restart the timer press <TIMER>
again.
Press and hold <TIMER> for 2 seconds to terminate the timer and leave, when
the timer is running.
When the clock before 30 second reach to 00.00, the voice
“be…be…be…be…be” will be heard until 00.00
When the clock reach to 00:00, the voice “be------” will be heard for 1 hour until
user terminate.
Press the < TIMER > to terminate the timer and leave.
As the alarm becomes active, the cooking timer, if exists, is terminated immediately.
ALARM1 and ALARM2 setting
Press <ALARM1> or <ALARM2> once, ‘ALARM1’ or ‘ALARM2’ goes solid in the
alphanumeric section.
The current setting of HH:MM and the type of alarm goes flashing by the
corresponding day-flags.
Press <UP> to advance the setting by 1 minute.
Press <DOWN> to move the setting back by 1 minute.
Press and hold <UP> or <DOWN> to change the setting in fast mode of 10
minutes per step.
Press <ALARM MODE> to change the type of alarm between daily, weekday,
weekend and daily independently, which are reflected by the 7 day-flags.
Press and hold <ALARM MODE> to enter daily independently mode. Press
<ALARM MODE> again to select the day and it will reflect by the day-flags.
Press and hold <ALARM MODE> to leave the daily independently mode and
return select daily, weekday and weekend.
Press same alarm key, which is <ALARM1> or <ALARM2>, once to select the
output format of the alarm
Output format LCD display
Beep sound ‘Bell’ symbol goes solid
Radio output ‘Radio’ symbol goes solid
Disable All the ‘Bell’ and ‘Radio’ are cleared
Press other key to start its corresponding function.
When no key has been pressed for 10 seconds, the system goes back to
auto-run mode.
When SDA is active
When the date/month/(year) matches with the SDA which has been enable, alert
becomes active at 8:00AM.
As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, Muted
Radio even radio ON & The “SDA” goes flash on LCD display.
The 10 minutes beep music per every hour until 23:00.
Press any key to start its corresponding function and the SDA at the day will be
terminate.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR2010 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster UR2010

Soundmaster UR2010 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info