562241
3
Zoom out
Zoom in
Previous page
1/7
Next page
How to used
As the unit is powered up, the date and clock are defaulted to Monday, 1
st
Jan
2007, 0:00 or 12:00AM.
The two alarms are defaulted to 0:00 or 12:00AM, daily type but disabled.
The radio is switched off.
It then switches to auto-run mode.
Auto-run Mode (Radio OFF)
Press <MODE> once to go to different mode sequentially.
Auto-run Mode Set the Clock Set the Date
(with Clock display)
Dimmer ON/OFF Automatic update ON/OFF Set the SDA
In radio mode, If RDS information is transmitted by the station, the station name
appears in place of the frequency; the frequency is displayed when there is no
RDS information had been received.
Press <Alarm-1> to review/set the alarm-1.
Press <Alarm-2> to review/set the alarm-2.
Only when the radio is ON, press <M1/M6>, <M2/M7>, <M3/M8> and <M4/M9>,
<M5/10> to recall the preset memories.
Only when the radio is ON, press <MEM>,<M1-M10>and then <MEM> again to
store the current station into memory.
Only when the radio is ON, press <Vol. +> and <Vol. -> to adjust speaker
volume.
When the radio is ON, press <M / SCAN> to preview those preset memory.
Press and hold for 2 seconds to activated the AMS (Automatic Memory Storage).
At every minute boundary, the real time clock is compared with the alarm setting
if it has been enabled. For details, please refer to the section of ‘When alarm is
active’.
Set the clock (manually)
Press <MODE> once when the unit stays in clock display mode.
The clock goes flashing the LCD with day-flag cleared.
The second keeps counting up once per second.
Press <UP> to advance the clock by 1 minute.
Press <DOWN> to move the clock back by 1 minute
Press and hold <UP> or <DOWN> to set the clock in fast mode of 10 minutes per
step.
Press <MODE> once to set the date.
Press other key to start its corresponding function.
When no key has been pressed for 10 seconds, the current setting is confirmed
and it switches to auto-run mode.
Set the date
Press <MODE> once in clock setting mode.
The current date goes flashing in the format of dd.mm.yyyy in the LCD.
Press <UP> or <DOWN> to change the current setting by 1 day per step. Press
and hold <UP> or <DOWN> to change the setting in fast mode of 10 days per
step. The day flag will be updated automatically when the date has become
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR2010 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster UR2010

Soundmaster UR2010 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info