619691
20
Zoom out
Zoom in
Previous page
1/20
Next page
18
GATSO
300M
SPECS
START
ALL MODE
In ALL mode the device will detect all alerts generated through GPS that
are within the selected range of the device. If you were travelling on a
Motorway for instance it would mean that the unit could detect locations
situated on an ’A’ road that is near to the Motorway. As it is not on the road
you are travelling however it is not a threat and you might prefer to select
the Motorway setting so that the unit would ignore unwanted signals
located by GPS. Important: laser and radar alerts remain unaffected.
4. Cancel Button
If during an alert you decide that you would like to cancel it simply press
the ’Cancel’ button. The display will automatically return to the Standby
screen and the device will be ready to alert you the next time you
encounter a stored co-ordinate or radar/laser source.
5. Mute Button
If during an alert you decide that you would like to mute the audible alert,
simply press the ’Mute’ button. The screen will continue to display a visual
alert but no sound will be heard. After you have travelled out of range of the
location the device will automatically reset so that the next time you encounter
a location you will receive both audible and visual alerts as normal.
6. Alert patterns
Gatso & Truvelo Safety Cameras
As you approach the Safety Camera the
unit will begin to emit your chosen audible
alert, either a Soft or Hard ’Beep’ at your
preset alert distance. As you get closer to
the camera the ’Beeping’ will quicken. At
the same time the display will indicate the
type of location you are approaching, your
current speed, the speed limit at the location, the road number and your
distance to the location. If you are approaching a radar based Gatso
Camera and have the S6-RLD attached an * will indicate whether the
camera is operational or not. This type of alert pattern is the same for
Truvelo Safety Cameras except that the display would indicate ’Truvelo’
not ’Gatso’ next to the signal strength distance meter.
If you would like to change the alert to a visual alert only press the ’Mute’
button to temporarily turn off the sound. If at any time you would like to
stop the alert, simply press ’Cancel’
SPECs Safety Camera Systems
Due to the fact that the SPECs camera
incorporates a series of cameras that
monitor you over a fixed distance, a
different alert pattern has been devised
to ensure that your concentration is
maintained throughout the danger zone.
If you are approaching the first camera in
SPEED
LIMIT
27MPH 30MPH
SPEED
LIMIT
48MPH 50MPH
CANCEL MUTE MENU
CANCEL MUTE MENU
19
the SPECs system your S6 will begin it’s alert at the preset alert distance
set by you with the display indicating ’SPECS START’. The unit would
then emit an audible alert every five seconds to remind you that you are
still within the SPECs system. If after 20 seconds you do not pass
another camera, for instance if you have turned off the motorway without
passing the last camera in the SPECs series, the alert will automatically
’Time out’ and the alert will finish.
Whilst travelling through a SPECs series however, your Snooper S6 will
provide both an audible and visual alert 250m before each camera as
well as indicating the number of each camera in the series i.e. SPECS 2,
SPECS 3 and so on, plus continuing to indicate every 5 seconds between
locations. When you reach the last camera in the sequence the display
will indicate ’SPECS END’
Please note that if you join a road in the middle of a SPECs system you
will automatically get a visual and audible alert, indicating the number of
that camera in the sequence, 250m before the first camera that you pass.
The display will indicate the number of that camera in the overall
sequence.
If you would like to change the alert to a visual alert only press the ’Mute’
button to temporarily turn off the sound. If at any time you would like to
stop the alert, simply press ’Cancel’.
Radar & Laser Alerts
If you have the S6-RLD connected to your S6 you will be able to receive
radar & laser alerts. The information provided is more basic than when
you receive an alert via GPS but still effective. When the device first
receives a radar alert the unit will begin to ’Beep’ slowly at first but
quicken, as you get closer to the source. At the same time the LCD
display will indicate what type of radar you are detecting, whilst a signal
strength meter in the form of a series of ’Blocks’ and a strength ’Level’
number will let you know whether you are getting closer to the source or
not.
If you receive a laser signal you will
get a very similar alert, however as
laser often requires instant action the
device simply gives you a full strength
audible alert whilst the display will
read ’Laser’. No signal strength will
be indicated.
As GPS is not used to locate radar
or laser only alerts it is impossible to
indicate the Speed Limit at these points or the road number.
If you would like to change the alert to a visual alert only press the ’Mute’
button to temporarily turn off the sound. If at any time you would like to
stop the alert, simply press ’Cancel’.
K-BAND
3
SPEED
27MPH
CITY CANCEL MUTE MENU
A6
A6
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper S6-R Neo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper S6-R Neo in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info