Manual Snooper S6-R Neo (page 19 of 20) (English)

619691

Zoom out

Zoom in

1/20

3. City Mode Button

The CITY mode is operated through the CITY button available on the

Standby screen and has been designed to help reduce unwanted signals

generated by GPS. There are three possible modes to choose from,

’CITY’, ’MOTORWAY’ or ’ALL’. To change from ’CITY’ to ’MOTORWAY’

simply press the button below ’CITY’ on the display once. The icon will

change to ’MWAY’ to confirm your selection. To change from ’MWAY’ to

’ALL’ press the button again. The icon will change to ’ALL’ to confirm your

selection. To return to the ’CITY’ setting press the button once again. The

icon on the display will change to ’CITY’ to confirm your selection.

CITY MODE

In CITY mode the Snooper S6 will ignore any alert generated through

GPS that is actually located on a Motorway that is in range of your device

but not an immediate threat to you, as you are not actually travelling on

that section of road. Important: laser and radar alerts remain unaffected.

Please note that whilst in the CITY mode the device will not detect

any locations on Motorways or ’M’ roads so you need to remember

to switch to either the ’MWAY’ or ’ALL’ settings when driving on a

Motorway or ’M’ road.

MOTORWAY MODE

In MWAY mode the Snooper S6 will ignore any alert generated through

GPS that is actually located on a none Motorway road that is in range of

your device but not an immediate threat to you, as you are not actually

travelling on that section of road. If your speed drops below 20mph the

device will sound an audible alert and ’Switch Modes?’ will be shown on

the display to remind you that you may no longer be travelling on a

section of Motorway and may need to change the mode to ’CITY’ or ’ALL’.

Important: laser and radar alerts remain unaffected.

Please note that whilst in the MWAY mode the device will not detect

any locations on none Motorway roads so you need to remember to

switch to either the ’CITY’ or ’ALL’ settings when leaving an ’M’ type

road.

Satellite Counter — Shows how many satellites your unit can currently see.

2 City Button — Confirms CITY , MWAY or ALL (see below for details).

3 Cancel Button — Used to cancel an alert.

4 Mute Button — Used to cancel an audible alert (see page 18 for details).

5 Menu Button — Used to access Full Logic Menu and set features and

settings.

6 Indicates direction of travel.

7 RD icon confirms if your radar/laser detector is successfully connected.

(This will only appear during start-up if you have S6-RLD connected).

8 Atomic Clock.

9 Shows vehicle speed.

7. Saving new co-ordinates

If in the unlikely event that you pass the location

of a Safety Camera and your Snooper S6 does

not provide an alert, the S6 gives you the

opportunity to upload the co-ordinates of the

location manually. Simply park safely as close

as possible to the site and press the new

location button. An icon will appear on the

display to confirm that the location has been

saved successfully. Next time you perform a

download you will get the opportunity to upload

the new site for verification. If verified successfully the co-ordinates will

be added to our master database.

If during the period before you perform your next download, you pass the

site again your S6 will now alert you to the new location. As the device

does not know what type of system you are passing the display will

describe it simply as ’MEMO’ and the number of that co-ordinate in the

units memory.

Features & Settings

1.Alert Settings

The Alert Settings allows you to

adjust the distance that your S6 will

detect from when utilising GPS and

also allows you to set the type of

audible warning you hear as the

device alerts you to a location. To

enter ’ALERT SETTINGS’ from the

Standby screen press the button

below ’Menu’ (5) on the LCD display

and then using the buttons below the

Up (3) and Down (4) arrows on the LCD display, scroll until ’ALERT

SETTINGS’ is highlighted. Then simply press the button below ’Select’ (5)

on the display and again use the buttons below the arrows on the display

to highlight the setting, either ’AUDIBLE ALERT’ or ’SET PRE ALERT’

depending on what you would like to adjust. Once you have made your

choice press the ’Select’ button.

AUDIBLE ALERT - There are three

AUDIBLE ALERT settings to choose

from. Using the buttons below the

arrows on the display (3 & 4), choose

between HARD TONE, SOFT TONE

and OFF (no audible alert) and press

the ’Select’ button (5) to confirm your

selection. The display will read

’SETTING CONFIRMED’ and will

return to the Menu screen.

New Location

Button

CANCEL

SELECT

1. ALERT SETTING

RADAR & LASER

3. AUTOMUTE

SOFT TONE

HARD TONE

OFF

3 4 5

2 3 4 5

SUB-MENU

MUTE MENU

CANCEL

SELECT

CANCEL

SELECT

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Snooper S6-R Neo in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Snooper S6-R Neo Manual

Product: