462937
7
Zoom out
Zoom in
Previous page
1/44
Next page
Please check www.sitecom.com for up to date drivers & utilities, manuals and support
4. Basic Installation & Configuration
4.1 Connecting the Hardware
Make sure that your USB devices are switched off and that the Server’s Power Adapter is
disconnected.
Connect the USB devices to the USB port with the USB cables.
Connect the MFP Server to your modem or wireless router with an Ethernet cable.
Turn on the USB device and make sure it’s ready to use.
Connect the Power Adapter to the MFP Server. The power indicator will light up and the
indicator will flash. When the Link indicator lights up, the Server is correctly connected to the
network. When the USB indicator stops flashing, the Server is ready to use.
4.2 Assigning an IP Address to the Server
Note
Before starting to search the MFP server, please ensure all Firewall applications are turned off (or
unblock the Control center software in your Firewall settings.
4.2.1 Preliminary
If you have a DHCP server in your network, your MFP Server will receive an IP address
automatically. The IP address will then appear in the Control Center or on the configuration
report that you printed earlier. If your DHCP server does not give an IP address to the MFP
Server, the MFP Server will use the Factory IP address: 192.168.0.220.
If you are not working in a DHCP network, you need to manually set the Server’s IP address.
To do this, please connect the MFP server directly to your PC. Change the IP settings on your
computer to match the range of the MFP server Factory IP address (192.168.0.220). For
example, temporarily change the IP-address on your computer to ‘192.168.0.200’.
4.2.2 Manual Setting for Server’s IP address
Press Start -> Control Panel. Then select “Network and Internet Connections” and click
Network Connections”.
Double click the “Network Connection” icon. Under the “This connection uses the following
items”, select the “Internet Protocol (TCP/IP)”. And then clickProperties” button.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom LN-309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom LN-309 in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info