462937
44
Zoom out
Zoom in
Previous page
1/44
Next page
Sitecom Multi Functional USB server LN-309
Note
Please note that after that, the Server will operate using the factory default values after restarting, i.e.,
your Server’s configuration will recover to Factory Default values.
Start the TFTP client Tool: Image Burner
Press Start -> All Programs -> Sitecom -> Multi-Function Printserver Control Center -> Image
Burner.
Enter the Server’s Fallback IP address: 192.168.0.100 and click Open Image to open your
new firmware. Please note that you must configure your PC’s TCP/IP such that PC and the
Server belong to the same LAN, i.e. PC’s IP is 192.168.0.xxx and subnet mask is
255.255.255.0.
Click Upload Image.
Wait for Image Uploading to finish and then click Close.
Plug-off the power adapter and then plug-in the power adapter to restart the Server.
12. The Init Button
The Init button is used for maintenance:
Simultaneously press the Init button and turn on (by plugging in the power adaptor) the Server until
the USB1 and USB2 LED indicators simultaneously blink. After that, the Server will do the following
tasks:
Perform a Factory Default of the MFP server, which will restore most of the parameters and
settings to factory default values,
Start a TFTP server. You can upgrade new firmware using any TFTP client tool.
Note
After performing the tasks mentioned above, you have to unplug the power adaptor and then plug
in the power adaptor to restart the Server.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom LN-309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom LN-309 in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info