620387
4
Zoom out
Zoom in
Previous page
1/4
Next page
4/4 Operating Instructions CB1B1426en_01 / 2013-07-05 Siemens Building Technologies
Do you want to change parameters?
+
Ok
Mode
If you want to change control parameters,
proceed as follows:
Press
+ and simultaneously for 5
seconds
Release the buttons and parameter
P01 is displayed on the bottom
segment
Press
+ and to scroll to the
parameter that needs to be changed
Press Ok to adjust the value inside the
parameter and confirm
Press Mode to exit the parameters
without saving or wait for the program
to exit automatically
Parameter list
Parameter
no.
Parameter
description
Setting range
(default)
P01 Time format 1 = 24:00 hours
(default)
2 = 12:00 am/pm
P02 Selection of °C or °F 1 = °C (default)
2 = °F
P04 Temperature sensor
calibration
-3…3 °C
Step 0.5 °C
(-6…6 °F, step 1 °F)
Default: 0 °C
P09 Buzzer 0 = OFF
1 = ON (default)
P11 Time switch type for
Auto Timer
0 = individual days
(default)
1 = all 7 days
2 = 5/2 days
P18 "Fil Pilote" zones 1 = zone 1 enabled
2 = zones 1 and 2
enabled
3 = zones 1, 2 and 3
enabled (default)
P22 Reload factory
settings
0 = OFF (default)
1 = reload
P23 Software version
information
No adjustment
possible
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100FP in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100FP

Siemens RDE100FP User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info