620387

Siemens RDE100FP Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
2/4 Operating Instructions CB1B1426en_01 / 2013-07-05 Siemens Building Technologies
Do you want to change the operating mode?
Mode
+
–
!
For each zone (1, 2 or 3), the unit allows you
to select Comfort, Economy or automatic
mode.
Press
+ or – to select zone 1, 2 or 3; then,
select the operating mode using the Mode
button.
Comfort mode is the permanent (24 h)
selection of Comfort. Select this operating
mode to maintain the Comfort temperature
without time switch (e.g. during occupancy
periods).
Economy mode is the permanent (24 h)
selection of Economy. Select this operating
mode to maintain the Economy temperature
without time switch (e.g. during the summer
when heating is Off). It is used for non-
occupancy periods when you want to
maintain the Economy temperature (e.g. at
night).
AUTO
In Auto Timer mode, the operating
modes (Comfort, Economy) are changed
automatically according to the time switch
settings.
Note:
Stop mode is a special mode when all
"Fil Pilote" stop signals are sent to all valid
and active zones. During Stop mode, you
can only do 2 tasks, either make parameter
settings or set the weekday and the time of
day. When Stop mode is enabled, the zone
number disappears.
You can enable the number of zones via
parameter settings (P18); the default value
is 3.
Do you want to enter your own time switch?
Option 1: Time switch with individual day settings
(P11=0)
Set
Ok
+
–
Mode
!
For the selected zone, you can select
Comfort or Economy mode in 15-minute
steps throughout the day. The 0:00 to 24:00
hour time bar allows you to select the
operating mode for the respective day(s).
Example:
0 6 12 24
18
1
2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
When Auto Timer mode is enabled,
changeover between the operating modes is
automatic after the settings are saved.
Proceed as follows:
1) Press
+ or – to select the zone.
2) Press Set and select
AUTO
.
3) Press Ok to confirm.
4) Time switch for Mon (1) is displayed.
5) Press
+ or – to select the day,
from Mon (1) to Sun (7).
6) Press Ok to confirm the selection and
initiate time programming.
During programming:
7) Press Mode to select the operating
mode (Comfort or Economy) or
8) Press
+ or – to set the time of day in 15-
minute steps for the selected operating
mode.
9) Press Ok to save the time switch.
10) Repeat steps 5-9 for all remaining days (if
required), or
11) Press Mode or wait for the program to exit
automatically.
Note:
Repeat the above steps to program the
remaining zones.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100FP in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100FP

Siemens RDE100FP User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info