620387
1
Zoom out
Zoom in
Previous page
1/4
Next page
1/4 Operating Instructions CB1B1426en_01 / 2013-07-05 Siemens Building Technologies
s
Operating Instructions
RDE100FP
The RDE100FP is a programmer with 3 "Fil Pilote" zones to select Comfort or Economy mode for different
zones at any time.
Note: - The Comfort setpoint must be set directly on each radiator’s thermostat
- The radiator’s operating mode must be set to "Automatic"
1 Display
Stop mode
Confirmation
Auto Timer mode
F
Room temperature in
degrees Fahrenheit
View and set Auto Timer
Comfort mode
C
Room temperature in
degrees Celsius
Economy mode
Button lock activated
Escape
Room temperature
Setting the weekday and
the time of day
Display of zone
Holiday mode setting
Weekday 1 = Monday
Weekday 7 = Sunday
Time of day
Timer bar
Morning: 12-hour format
Afternoon: 12-hour format
Current room
temperature
2 Change operating mode
3 Set
4 Ok
5 Decrease zone value
6 Increase zone value
Do you want to set the time of day and the weekday?
Set
Ok
+
Mode
!
Proceed as follows:
Press Set and select
Press Ok and the time of day flashes for setting
Press
+ or to set the time of day
Press Ok to confirm
Weekday flashes; press
+ or to select the weekday
Press Ok to save
Press Mode to exit or wait for the program to exit automatically
Note:
In the event of a power failure followed by power restoration, the time of day flashes, which means that the user
must adjust it and repeat the steps from point 3 above.
All others setting are saved.
Until the time setting is made, the program sends protection commands to all available zones.
Do you want to lock the buttons?
Mode Press and hold Mode for at least 7 seconds to activate a button lock. Repeat to unlock.
The unit operates normally when the buttons are locked, but changes cannot be made.
Do you want to set your Holiday mode?
Set
Ok
+
Mode
!
You can enable Holiday mode for all zones. The radiator managed by the programmer controls the room
temperature with the Protection setpoint.
Press Set and select
Press Ok to confirm
Press
+ or to set the number of days for holidays (0 = Holiday mode Off)
Press Ok to save
When Holiday mode is activated, the remaining days are displayed
Note:
If Mode is pressed while Holiday mode is active, the function is deactivated and the symbol disappears.
Energy saving tips without loss of comfort
Select Auto Timer mode during the heating period and set the time switch as desired
Select Economy or Holiday mode for longer periods of non-occupancy and during the summer
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100FP in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100FP

Siemens RDE100FP User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info