1. Switch off your PC and disconnect the power cord.
2. Open the PC case.
3. Remove the 5.25" mounting bay’s front bezel.
4. Insert the docking station into the mounting bay.
5. Attach the docking station from both sides inside the mounting bay using
the included screws.
6. Connect the docking station’s SATA data cables to the respective SATA
connectors on the mainboard (for further information also refer to your
mainboard’s manual).
7. Connect the internal USB3.0 cable of the docking station to the respective
available USB3.0 connector on the mainboard (for further information
also refer to your mainboard’s manual).
8. Plug the power connector on the docking station’s back side to a matching
power connector of your PSU.
Before its first use, the hard drive must be partitioned and formatted:
To format the hard drive, right click with the mouse on My Computer and
then select Manage.
In Windows 7, select Start, right click on Computer and select Manage.
Select Disk Management. Here you will find a list of the hard disks and
drives you can format.
Right click on the desired hard drive and select Partition. It is possible that
the disk must still be first initialized.
We recommend using the NTFS file system for Windows PCs. You can then
reformat the hard disk.
Caution:
Ensure that you have selected the correct disk to format; any data on the
selected hard disk will be lost during partitioning and formatting!
1264_mn_02
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sharkoon SATA QuickPort Intern Multi at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sharkoon SATA QuickPort Intern Multi in the language / languages: English as an attachment in your email.
The manual is 0,06 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Sharkoon SATA QuickPort Intern Multi
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
