758397
7
Zoom out
Zoom in
Previous page
1/8
Next page
Electric Food Slicer
SFS 4050SS
EN
EN-7
2015 09/2015
Note:
If food gets stuck to the cutting disc A5, stop slicing and clean the cutting disc A5 using a plastic
spatula. Before cleaning the food slicer, turn it off and disconnect it from the power socket.
We recommend that you wet the cutting disc A5 before cutting cheese.
Some food may cause discolouration of plastics. However, this does not have any effect on the
functionality of the food slicer.
5) Turn the food slicer off using the power switch A4.
6) Before taking away slices or remains of sliced food, ensure that the cutting disc A5 has come to
a complete stop.
7) After finishing using the appliance, disconnect it from the power socket.
CLEANING AND MAINTENANCE
Before cleaning the appliance, always turn it off and disconnect it from the power socket. Using the
thickness adjustment dial A3, set the plate to position 0 mm.
After each use remove any food remains from the food slicer. Clean parts that come into contact
with food using a wiping cloth dipped in clean water and then dry with a wiping cloth.
For a more thorough clean, disassemble the food pusher A2, the sliding plate A7 and the cutting
disc A5. Clean these parts using warm water and kitchen detergent. Then thoroughly rinse under
flowing water and dry them.
Note:
Remove the cutting disc A5 by turning the central fastener A6 clockwise and take it off the
drive unit.
Attention:
Pay extra attention when handling the cutting disc A5. To avoid injury, do not touch the blade.
Before using again, assemble the appliance according to the instructions in chapter Assembling the
electric food slicer.
Wipe the outer surface of the drive unit and the base plate using a dry wiping cloth.
For cleaning do not use thinners, solvents or cleaning agents that cause abrasion.
STORAGE
When not using the appliance, store it in a dry place out of children's reach.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SFS 4050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFS 4050 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info