758397
4
Zoom out
Zoom in
Previous page
1/8
Next page
EN-4
EN
Electric Food Slicer
SFS 4050SS
2015 09/2015
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE FOR FUTURE USE.
Before connecting this appliance to the socket outlet, make sure the voltage stated on the label of
the appliance corresponds to the voltage in your power socket.
Never use accessories, which have not been supplied with this appliance or which have not been
explicitly recommended by the manufacturer for this appliance.
This appliance is designed for household use.
Do not use the appliance in an industrial environment or outdoors!
Do not place the appliance on window sills or on unstable surfaces. Only place the appliance on an
even, dry and stable surface.
Do not place the appliance in the vicinity of an open flame or appliances that are sources of heat.
Ensure that the power plug contacts do not come into contact with water or moisture.
Do not wash the drive unit under running water or submerge it in water or another liquid.
Only use the appliance for slicing food excluding hard baked goods, frozen food, food in plastic or
aluminium foils, meat with bones, fruit with hard stones, etc.
Before every use check that the slicing disc is properly attached to the appliance.
For pushing food against the cutting disc use only the food pusher supplied with this appliance.
Do not touch the rotating cutting disc.
If food gets stuck on the cutting disc, clean it using a plastic spatula. Before cleaning the appliance,
turn it off and disconnect it from the power socket.
Do not insert your fingers or any other items, such as knives, forks, etc. into the area between the
cutting thickness setting plate and the cutting disc.
Check that the cutting disc has come to a complete stop before taking away the food.
The maximum time of non-stop operation is 10 minutes. After 10 minutes of operation leave the
appliance idle for 15 at least minutes.
Always disconnect the appliance from the power socket if you will not be using it and if you are
leaving it without supervision, before assembly, disassembly or cleaning.
Do not disconnect the appliance from the power socket by pulling on the power cord. This could
damage the power cord or the power socket. Disconnect the cord from the power socket by gently
pulling the plug of the power cord.
Pay increased attention when handling the cutting disc to prevent injury caused by the blade.
If the power cord is damaged, have it replaced at a specialised service centre. It is forbidden to use
the appliance if it has a damaged power cord or plug.
To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any
adjustments to it. Have all repairs or adjustments of the appliance performed at an authorised
service centre. Tampering with the appliance during the warranty period may void the warranty.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SFS 4050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFS 4050 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info