758392

Sencor SES 4900SS Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
- 6 - Copyright © 2020, Fast ČR, a.s. 12/2020
EN Espresso machine
User'smanual
■ Prior to using this appliance, please read the user‘smanual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in
the manner described in this user’smanual. Keep this user‘smanual in
asafe place where it can be easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the vendor
or warranty card for at least the duration of the legal liability for
unsatisfactory performance or quality. In the event of transportation,
we recommend that you pack the appliance in the original box from
the manufacturer.
DESCRIPTION OF THE ESPRESSO MACHINE
A1 Control panel
A2 Cup warming surface
A3 Storage compartment cover
A4 Water tank lid
A5 Water tank
A6 Control knob
– turn off the function
– dispense steam / hot
water
A7 Steam nozzle with swivel
hot milk (HOT MILK) and
cappuccino (CAPPUCCINO)
dispensing mechanism
A8 Drip tray
A9 Drip tray grate
A10 Full drip tray indicator
A11 Portafilter
A12 Brew head
A13 Empty water tank indicator
light
A14 Descaling indicator light
A15 Water filter
A16 Coffee measuring cup with
tamper
Accessories (not shown)
Basket for brewing one cup of coffee
Basket for brewing two cups of coffee
Water filter
Cleaning tool
DESCRIPTION OF THE CONTROL BUTTONS
B1 On/Off button
B2 One-cup brew button
B2 Two-cup brew button
B4 Steam dispensing button
BEFORE FIRST USE
■ Remove all packaging materials from the appliance and remove any
protective film, promotional tags or labels.
■ Install the appliance on an even, dry and clean surface. Take out the
water tank A5, remove the lid A4, rinse it out with clean water with
the addition of a small amount of neutral dishwashing detergent.
Then rinse it out thoroughly using clean water, dry it and put it back
in its place.
■ Remove the drip tray A8 together with the grate A9. Wash using
clean water with the addition of asmall amount of neutral kitchen
detergent. Then rinse it out thoroughly using clean water, dry it and
put it back in its place.
■ Wipe the outer surface of the appliance with alightly dampened cloth
and then wipe it thoroughly dry.
■ To ensure the optimal lifetime of the appliance, it is necessary to allow
its internal components to be rinsed out several times with hot water
prior to first use. For this purpose, use button B2 or B3, as
described in chapter „Rinsing out the espresso machine“.
INSTALLING THE WATER FILTER
■ Remove the water filter from the plastic bag.
C1: Submerge the water filter in cold water for 5 minutes. Then take it
out of the water.
C2: Take out the water tank. Attach the filter and push on the adapter
located at the bottom of the water tank so that it touches the
bottom.
C3: Fill the water tank with clean cold water and insert it back. Check
that the water tank is correctly installed.
■ It is recommended to replace the filter every 2 months.
WATER HARDNESS SETTINGS
■ It is necessary to set the correct water hardness before using the
espresso machine. You can find out your water hardness from your
water utility company.
■ Check that the espresso machine is turned off and the power cord
plug is connected to a power socket.
■ Simultaneously hold down B1 , B2 and B3 for 5 seconds.
The button of the previously set water hardness will start flashing.
■ Press the button corresponding to your water hardness – see table
below. The espresso machine will turn off and is ready for use.
Button Water hardness Amount of water for
descaling
1 cup low up to
50mg/l every 20 litres
2 cups medium 50–350mg/l every 12 litres
Steam high higher than
350mg/l every 6 litres
Note:
The water that you pour into the water tank A5 should
ideally be at room temperature (approximately 25 °C).
Water that is too cold, could negatively affect the final taste
of the coffee beverage.
Attention:
Always fill up to the maximum mark. Never overfill the
water tank A5. Never fill the water tank A5 with warm
or hot water, sparkling water or other liquids such as,
for example, milk. This could damage the appliance.
■ Do not leave water in the water tank A5 for longer than one day. For
brewing quality fresh coffee, it is necessary to always use fresh water.
Otherwise, the flavour of the resulting beverage may be negatively
affected.
■ When the indicator light A13 is lit, it is necessary to refill the water
tank with water. Remove the lid A4 and pour cold water into the water
tank A5.
Attention:
When pouring water into the water tank A5, be very
careful not to pour it on to the espresso machine or
the power cord. Always fill up to the maximum mark.
TURNING ON THE ESPRESSO MACHINE
Make sure that the espresso machine is installed on an even, dry and
clean surface, that the water tank A5 is full and that the drip tray A8
with the grate A9 is installed. Make sure that the drip tray A8 is empty.
Unwind the power cord and insert the power plug into apower socket.
Press button B1 to turn on the espresso machine. Button B1 will
start flashing, which means that the espresso machine is heating up to
operating temperature.
When button B1 stops flashing, the espresso machine is ready for use.
Note:
Button B1 may flash during operation, this is normal,
since it indicates that the espresso machine is heating up
to operating temperature. It will not be possible to press
any other button while button B1 is flashing. Wait until
button B1 stops flashing.
TURNING OFF THE ESPRESSO MACHINE
■ When you have finished using it, turn off the espresso machine
by pressing button B1 and disconnect the power cord from the
power socket. Allow the espresso machine to cool down and clean it
according to the instructions in chapter „Cleaning and maintenance“.
RINSING OUT THE ESPRESSO MACHINE
■ Turn on the espresso machine and wait until it heats up to operating
temperature.
■ Place abowl (at least 100 ml in capacity) underneath the brew head
A11.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SES 4900SS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SES 4900SS in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info