■ Prevent the power cord and power plug from coming into
contact with water or another liquid.
■ Use the appliance according to the instructions in the
user'smanual. Otherwise, injuries, damage to the appliance or
adangerous situation may result.
Attention:
Hot surface.
■As aresult of residual heat, accessible surfaces of the appliance are hot during its use and afterwards. Do not touch hot surfaces.
■Before connecting the appliance to apower socket, check that the rated voltage on its rating label matches the electrical voltage in the power socket.
■Connect the appliance only to aproperly grounded socket. For safety reasons, we do not recommend using multi-socket adapters or extension cords.
■Do not place the appliance on window sills, kitchen sink drainboards or unstable surfaces. Always place it on astable, even and dry surface.
■Do not place the appliance on or near an electrical or gas stove, or in the vicinity of an open flame.
■Never use the appliance in the near vicinity of abath, shower or swimming pool.
■Use the appliance only for the purposes for which it was designed.
■Only use the appliance with the original accessories that came with it.
■To ensure sufficient air circulation, free space of at least 15 cm must be maintained around and above the appliance when it is running.
■Only use the top surface of the appliance for warming cups. Do not use it as astorage rack.
■Fill the water tank with clean cold water. Do not pour hot water or other liquids into it or place any items inside it.
■Before turning on the appliance, check that:
■– the drip tray together with the grate is installed in position;
■– the water tank is filled with asufficient amount of water and is properly installed in position. The water level must not exceed the maximum mark.
■Before you begin brewing coffee, check that the portafilter is properly attached to the brew head. Pressure is created in the portafilter during the coffee
steaming process, so do not move it while it is running. Otherwise, this could result in adangerous situation.
Attention:
Incorrect use may lead to injuries.
■When operating the appliance, be especially careful to avoid scalding by boiling water or steam.
■Regularly inspect the water level in the water tank when using the appliance. When the water level falls below the minimum water level mark, add water.
Before adding water, first turn the appliance off and disconnect it from the power socket.
■To protect the pump from damage, the appliance is equipped with abuilt-in thermal fuse that will disengage it when it runs empty. In the event that such
asituation occurs, disconnect the power cord from the power socket and allow the appliance to cool down for at least 30 minutes. Then you may continue
using it.
■Always turn off the appliance and disconnect it from the power socket when not using it, when leaving it without supervision, before disassembling or
assembling it, before filling up the water tank, and before moving or cleaning it. Allow the appliance to cool down before cleaning or moving it. Do not move
the appliance with acoffee cup located on the drip tray grate or with cups located on the cup warming surface.
■Keep the appliance and its accessories in clean condition. Clean and maintain it according to the instructions in chapter Cleaning and maintenance. Never
wash the appliance under running water or submerge it in water or another liquid.
■Make sure that the power cord does not come into contact with ahot surface and prevent the power plug from coming into contact with water.
■Disconnect the appliance from the power socket by pulling on the plug, never pulling on the power cord. Otherwise, this could damage the power cord or
the socket.
■To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any adjustments to it. Have all repairs or adjustments performed
at an authorised service centre. By tampering with the appliance, you risk voiding your legal rights arising from unsatisfactory performance or quality warranty.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SES 4900SS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SES 4900SS in the language / languages: English as an attachment in your email.
The manual is 1,1 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
