Manual Seiko S351 (page 3 of 7) (English)

757537

Zoom out

Zoom in

1/7

Notes:

・The time can be entered either by using the number entry and time keys or by using

the number entry keys alone according to the time you wish to set. (For details, see

“Entry of times” in “■ HOW TO USE THE TIME CALCULATION MODE”.)

・If a wrong number has been entered, press the clear/clear entry key and enter the

correct one.

・The hour should be entered in the 24-hour indication. (If it is 2:00 p.m., for example,

enter “14” instead of “2”.)

・Any digits left unentered will be regarded as “0”. (See “■ HOW TO USE THE TIME

CALCULATION MODE”.)

Press button in accordance with a time signal. The display will return to the TIME

and the seconds will start immediately from the set time.

Notes:

・If the entered time exceeds “23:59 59”, the display will return to the time setting

display.

・If digits greater than “60” are entered for the minutes or seconds and button is

pressed, one hour or minute will be added, respectively.

・If the watch is set to show the time in the 12-hour indication, the set time will be display-

ed in the 12-hour indication, though it should be entered in the 24-hour indication.

・When the time is not newly set and button  is pressed, the display will show the

time set previously.

→

(Time set previously)

Second setting (Second setting can be made easily if the time displayed is less

than 30 seconds ahead of or behind the correct time.)

・Follow the procedure below to reset the second digits to “00”.

In the time mode, press button to show the second

setting display.

→

Press button in accordance with a time signal.

The second digits are reset to “00”.

Notes:

･ When the second digits read any number from “30”to

“59” and button is pressed, one minute is added and

the seconds are reset to “00”.

･ If the time is more than 30 seconds ahead of or behind

the correct time, show the time setting display to set the

correct time.

･ When button is pressed, the watch will return to the

time mode.

Changeover between 12-and 24-hour indications

・As the 24-hour indication system is commonly used in the broadcasting

stations, the watch is so designed that the time should be entered only in

the 24-hour indication.

・It is also possible, however, to show the time in the 12-hour indication.

In the time mode, press button three times to show the display for

changeover between 12-and 24-hour indications.

With each press of button , the display changes over between the 12-

and 24-hour indications alternately.

〈24-hour indication〉 〈12-hour indication〉

Notes:

・Once the desired time indication has been selected in the time mode, the

current time will be displayed in the selected indication in all modes.

・When the 12-hour indication is selected, there is no mark displayed to

distinguish between “AM” and “PM”.

■HOW TO USE THE TIME CALCULATION MODE 「CALC.」

・The addition and subtraction of times can be made simply by

entering the hour, minute and second digits.

・Up to ±99 hours 59 minutes and 59 seconds can be entered

for calculation.

・The time can be entered either by using the number entry and

time keys or by using the number entry keys only.

・The calculation result can be stored and recalled for use in the

timer and stopwatch modes as the starting time.

Entry of times

To enter the time digits, use the number entry and time keys

as described below.

●Follow either of the two methods below.

〈Entry with the number entry keys only〉

・Use the number entry keys from [0] to [9] to enter the desired

time.

・This method is useful for entering time with a few digits.

〈Entry with the number entry and time keys〉

・Use the time keys ([時 (HOUR)], [分 (MINUTE)] and [秒

(SECOND)]) together with the number entry keys to enter

the desired time.

・This method is useful for entering time having blank digits,

for instance, “2 hours”.

Notes:

・Before entering time, press the clear

/clear entry key to reset the digits to “0”.

・The two methods above cannot be

used in combination to enter the time.

See the following cases as examples.

〈Case 1〉To enter “2 hours and 15

minutes”: Once you have

entered [2] and [時 (HOUR)]

for the hour digits, you should

not enter [1], [5], [0] and [0]

but should enter [1], [5] and

[分 (MINUTE)].

〈Case 2〉To enter “2 hours and 15

minutes”: Once you have

entered [2], [1], [5], you

should not enter [分

(MINUTE)] but should enter

[0] and [0].

・To set the starting time in the timer and

stopwatch modes, also use either of the

two methods above.

分時 秒

Notes:

・If a wrong number has been entered, press the

clear/clear entry key and enter the correct one.

・If a number greater than 60 is entered for the

minute or second digits, one hour or minute is

added when [＋], [−] or [＝] is entered. (In this

case,“ ″

” mark will be displayed.)

・When a calculation result exceeds 99 hours 59

minutes and 59 seconds, the error mark “Error”

is displayed, To clear the error mark, press the

clear/clear entry key. The digits are reset to “0”.

・Enter from the upper digits in order.

・Start entering from the digits having

numbers. It is not necessary to

enter [0] and [0] for the hour digits.

・Enter [0] for the blank digits.

●Detailed explanation of entry methods

Turn the mode selector to set the knob to “CALC.”.

Entry with the number entry keys only

・Use the number entry keys to enter numbers in the order of hour,

minute and second digits, entering [0] for the blank digits.

Ex. 1) 2 hours 15 minutes 10

seconds

[2] [1] [5] [1] [0]

Ex. 2) 15 minutes 2 seconds

[1] [5] [0] [2]

Ex. 3) 10 hours 8 seconds

[1] [0] [0] [0] [0] [8]

［C/CE］

→

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Seiko S351 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Seiko S351 Manual

Product: