Categories
781653

Scheppach DP60 Manual

26
Zoom out
Zoom in
Previous page
1/100
Next page
www.scheppach.com
26 | GB
Holding the workpiece by hand during operation
may result in personal injury.
c. Do not wear gloves.
Gloves may be entangled by the rotating parts or
chips leading to personal injury.
d. Keep your hands out of the drilling area while
the tool is running.
Contact with rotating parts or chips may result in
personal injury.
e. Make sure the accessory is rotating before
feeding into the workpiece.
Otherwise the accessory may become jammed in
the workpiece causing unexpected movement of
the workpiece and personal injury.
f. When the accessory is jammed, stop applying
downward pressure and switch off the tool. In-
vestigate and take corrective actions to elimi-
nate the cause of the jam.
Jamming can cause unexpected movement of the
workpiece and personal injury.
g. Avoid generating long chips by regularly inter-
rupting downward pressure.
Sharp metal chips may cause entanglement and
personal injuries.
h. Never remove chips from the drilling area
while the tool is running. To remove chips,
move the accessory away from the workpiece,
switch off the tool and wait for the accessory
to stop moving. Use tools such as a brush or
hook to remove chips.
Contact with rotating parts or chips may result in
personal injury.
i. Accessories with speed ratings must be rated
at least equal to the maximum speed marked
on the power tool.
Accessories running faster than their rated speed
can break and y apart.
Attention: Laser radiation
Do not stare into the beam
Class 2 laser
Protect yourself and you environment from acci-
dents using suitable precautionary measures!
• Do not look directly into the laser beam with unpro-
tected eyes.
• Never look into the path of the beam.
• Never point the laser beam towards reecting sur-
faces and persons or animals. Even a laser beam
with a low output can cause damage to the eyes.
• Caution - methods other than those specied here
can result in dangerous radiation exposure.
• Never open the laser module. Unexpected exposure
to the beam can occur.
• The laser may not be replaced with a different type
of laser.
• Repairs of the laser may only be carried out by the
laser manufacturer or an authorised representative.
Remaining hazards
Even if you use this electric power tool in accord-
ance with instructions, certain residual risks can-
not be eliminated. The following hazards may
arise in connection with the equipment’s con-
struction and layout:
• Lung damage if suitable dust protection mask is not
worn.
• Hearing damage if suitable hearing protection is not
worn.
• Damage to health resulting from hand/arm vibration
if the device is used over an extended period of time
or if it is not properly operated and maintained.
m Warning!
This electric tool generates an electromagnetic eld
during operation. This eld can impair active or passive
medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recom-
mend that persons with medical implants consult with
their physician and the manufacturer of the medical im-
plant prior to operating the electric tool.
6. Technical data
AC motor 220 - 240 V~ 50 Hz
Nominal power S1 710 Watt
Operating mode S2 5min* 900W
Idle speed n0
- 1st gear 170 - 880 min-1
- 2nd gear 490 - 2600 min-1
Max. drilling speed
- Steel 170 - 880 min-1
- Wood 490 - 2600 min-1
Drill chuck clamping range 1,5 - 13 mm
Max. drill stroke. 100 mm
Size of base plate 350 x 300 mm
Weight 9,4 kg
… 26 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DP60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DP60 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info