Manual Russell Hobbs 23560-56 (page 4 of 128) (All languages)

705983

Zoom out

Zoom in

1/128

2. Place the steam guide around the heating element. The three holes in the guide must go over the

three pins (Fig R).

3. Position the drip tray securely over the water reservoir.

4. Place the steaming basket(s) on top of the drip tray. The basket handles are labelled 1, 2, and 3.

Position basket 1 on the lowest level, 2 on the middle level, and 3 on the top level.

5. Place the lid on top of the uppermost steaming basket.

FILLING

1. Fill the water reservoir with fresh cold tap water. The level should be above the Min and below the

Max marks of the water window. Never ﬁll above Max.

2. You can ﬁll the reservoir directly or through the water ﬁll inlet at the rear (Fig P).

• When topping up the water level during steaming, always use the water ﬁll inlet.

INFUSER

The infuser can be used during steaming to add ﬂavour. Wet the screen slightly then add any of the

following ingredients to the screen:

• Herbs and spices (whole or coarsely chopped)

• Garlic cloves (whole or sliced)

• Thin slices of citrus fruits such as lemon or lime

COOKING RICE

1. Add the dry rice and water to the rice bowl in the ratio according to the package directions.

2. Place the rice bowl into the bottom steaming basket.

3. Fit the lid on the steaming basket.

4. Set the timer for 25 - 30 minutes and press the C button.

5. Check that the rice is cooked to your liking. Adjust the steaming times if not.

• When you are using multiple steaming baskets, always cook rice in the lowest basket.

• Brown rice and wild rice cooking times will diﬀer.

PROGRAMMING YOUR STEAMER

Setting the clock

1. Plug in your steamer.

2. The digital clock will display 00:00.

3. Press the TIME button once. The hour digits will begin to ﬂash.

4. Press + or - until the correct hour appears on the display. The clock is set in 24 hour format.

5. Press the TIME button again. The minute digits will begin to ﬂash.

6. Press + or - until the correct minute appears on the display.

7. After 20 seconds, the clock’s digits will stop ﬂashing to indicate the clock is set.

• If your steamer is unplugged or power to it is interrupted, the time will need to be reset.

Setting the Steaming Time

1. Ensure the water reservoir is ﬁlled. Monitor this throughout steaming.

2. Press the TIME button repeatedly until the t on the display screen aligns with the nearest steam

time you require.

3. If you need to adjust the time, use the + and – buttons until the display shows the exact time you

require.

4. Press the C button to begin steaming. The timer will count down in one-minute increments.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23560-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 23560-56 Manual

Product: