Manual Rupes PL824V (page 5 of 28) (English, German, Dutch, French, Italian, Spanish)

489895

Zoom out

Zoom in

1/28

PL824V PLANER

(See figures in pages 24, 25, 26, 27)

1. FOR YOUR SAFETY

WARNING! Before using the planer, model

PL824V, carefully read the GENERAL SAFETY

PAMPHLET included with the machine's docu-

mentation.

Before connecting the machine, ensure that the

supply voltage matches that which is shown on

the identification plate.

Use safety goggles when working with this

machine.

Keep your hands away from the cutting area.

Always guide the planer firmly with both hands.

Avoid planing nails. Inspect the work surface

before planing it.

Always remove the plug from the mains socket

before carrying out any maintenance work with

the machine.

Always use original RUPES blades. Never use

blades that are dull, defective or in bad condition.

Always use the original RUPES blade holders

and blade supports mounted on the machine. If

necessary, replace them with original RUPES

parts.

Operate the planer with the rest shoe.

Wait until the machine has come to a complete

halt before releasing or moving it.

Wear earplugs when using the machine (see

chapter 12)

2. SPECIFICATIONS

Input power 750W

Motor 50/60Hz

No load speed 13,000/min

Cuts per minute 26,000

Equivalent measured continuous

acoustic pressure level A 84 dB(A)

Normal level ofvi brations (hand-arm) <2.5m/s

Cutting width 82mm

Cutting depth 0-4mm

Rabbeting depth

25mm

Weight 3.750 Kg

3. ST

ANDARD EQUIPMENT

Inside the box you will find the following compo

nents:

1. Planer PL824V

2. Lateral fence

3. Spanner for fixing blades (a/f 8)

4. GENERAL DESCRIPTION

The Planer PL824V comes equipped with:

• Reversible HM blades

•Cutting regulator with automatic locking, for pla-

ner width of up to 4 mm

• Regulable lateral shoe for rebate depth of up to

25 mm

• Sliding horizontal guide for planing overlaps of

0-1 mm

• Lateral fence for work to be done on the edge

of the workpiece

•Collector outlet can be placed on the right or left

side

• Safety switch A(Fig. 1) with inverted locking B

(Fig. 1) for right-handed or left-handed users that

prevents the machine from starting accidentally

• Lateral blade guard

• Concealable rest shoe, to prevent the blade

from coming into contact with the workpiece once

the planer is switched off

• Blade-holder equipped with mechanical brake

system.

5. CUTTING CONTROL

Cutting depth

Turning knob C (Fig. 2) clockwise regulates cu

tting. The knob's locking screws enable planing

width adjustment to be carried out in 0.2-mm

steps. Maximum cutting depth is 4 mm.

Planing of rebates and overlaps

Rebate depth is set by means of the parallel shoe

D (Fig. 2). The shoe is placed at the desired

height by simultaneously pressing and turning

the knob E. When the knob is released the shoe

remains fixed in the desired position. Maximum

rebate depth is 25 mm.

The planer PL824V enables one to plane over-

laps (Fig. 3), thanks to its sliding guide F (Fig. 3).

This permits cutting from 0-1 mm by means of

the regulation of the screw G (Fig. 3, 4). Always

remember to have a good support for the planer

base.

Lateral fence

The lateral fence H (Fig. 2) enables you to posi-

tion the planer for work to be done on the side of

the workpiece. To attach it, push lever I (Fig. 2)

and slide the square by means of the hole J (Fig.

4) to the desired measurement. When the lever I

is released, the parallel square will remain locked

in this position. If need be, a more precise regu-

lation can be obtained using the bracket K (Fig.

2).

Chamfering the edges

To chamfer the edges of a workpiece quickly and

English

librettoPL824 30-03-2007 14:57 Pagina 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes PL824V in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes PL824V Manual

Product: