323652
8
Zoom out
Zoom in
Previous page
1/8
Next page
36
If you have any product problems or queries please contact our Customer Relations Team first for
expert help and advice:
HELPLINE: 0845 602 1454 - UK (01) 461 0390 - Ireland or consult our website - www.rowenta.co.uk
Problems Possible causes Solutions
Water runs through the holes in the
soleplate.
The boiler is too full.
The thermostat is not working : the
temperature is always too low.
You are using the steam control
button before the iron is hot enough.
Water has condensed in the pipes
because you are using steam for the
first time or you have not used it for
some time.
Do not fill the boiler right up to the
top.
Contact an Approved Service Centre.
Check the thermostat and steam flow
setting (according to model).
Press the steam control button away
from your ironing board until the iron
produces steam.
White streaks come through the
holes in the soleplate.
Your boiler has a build-up of scale
because it is not rinsed out regularly.
Rinse the boiler every 10 uses (see §
rinsing the boiler). If your water is
hard, increase the frequency.
Brown streaks come through the
holes in the soleplate and stain the
linen.
You are using chemical descaling
agents or additives in the water for
ironing.
Your linen is not rinsed sufficiently or
you have ironed a new garment
before washing it.
Never add this type of product in the
boiler (see § what water to use).
Ensure linen is rinsed thoroughly to
remove any soap deposits or
chemicals on new garments which
have been sucked up by the iron.
The soleplate is dirty or brown and
may stain the linen.
You are ironing at too high a
temperature.
You are using starch.
See our recommendations regarding
temperature control setting.
Always spray starch on the reverse
side of the fabric to be ironed.
There is no steam. The boiler is empty.
The boiler is not yet ready.
Fill the boiler.
After starting the appliance, wait for 8
mins or until the steam ready
indicator light comes on (according
to model).
Steam escapes from the boiler cap. Cap screwed on incorrectly.
The seal on the cap is damaged.
The appliance is faulty.
Screw the cap back on.
Contact an Approved Service Centre.
Stop using the generator and contact
an Approved Service Centre.
Steam or water escape under the
appliance.
The appliance is faulty. Stop using the generator and contact
an Approved Service Centre.
IS THERE ANY PROBLEM?
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
ENVIRONMENT PROTECTION FIRST !
Notice WaterControl 013982-N65 3/07/06 12:30 Page 36
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta dg 5050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta dg 5050 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info