323652
7
Zoom out
Zoom in
Previous page
1/8
Next page
35
9 • Cleaning the generator
The soleplate : You can clean the soleplate
of your iron, once it has cooled down, with a
damp cloth or sponge.
If the soleplate becomes very dirty, we
recommend that you clean it with a
commercially available cleaning product.
Do not use any abrasive products to clean it.
The base unit : Clean the plastic parts
occasionally with a soft dampened cloth.
10 • Rinsing the boiler
(once a month)
Check that the generator is cold and
unplugged for more than 2 hours. (Q).
Using a jug, fill the boiler 3/4 full with
untreated tap water (R).
Shake the base unit for a few moments (S) and
then empty it completely over your sink (T).
To obtain the best results, we advise you to
repeat this operation.
BE CAREFUL : To extend the life of your
boiler and to avoid the building up of scale, it
is essential that you rinse out the boiler at
least after every 10 uses (approximately once
a month). If your water is hard, increase the
frequency.
In particular, do not use descaling agents for
rinsing out the boiler, as they could damage
it.
Never hold the iron or the base unit under
the tap.
Do not use detergent or descaling products
for cleaning the soleplate or the base unit.
MAINTENANCE AND CLEANING
Before cleaning or emptying your generator, it is imperative that you turn it off, unplug it and
leave it to cool for more than 2 hours, to prevent any risk of burns.
7 • Filling the tank when it is
empty during operation.
Stop the generator by pressing the on/off
switch (N) and disconnecting the plug. Slowly
unscrew the boiler cap.
Take a jug and fill it with a maximum of one
litre of water then pour the water into the tank,
taking care not to let it spill over (O).
Replace the boiler cap, screwing on tightly,
reconnect your generator to the mains, and
switch it on. The Water Control lights will
successively come on then switch off (
F) while
the tank is heating up.
When the steam is ready, the Water Control
lights will remain stationary and indicate the
water level in the tank (G).
8 • Storing the generator
Turn off at the main switch and unplug. Place
the iron on the rest. Put away the electric cord
and steam cord (
P).
Leave the steam generator to cool down
before putting it away if it is stored in a
cupboard or confined space.
You can store your steam generator in
complete safety.
If this occurs, remove the excess water.
VERY IMPORTANT : Before opening your
boiler, ensure that there is no more steam
left inside by pressing the steam control
button located on the handle of the iron and
keep it pressed down until there is no more
steam.
GB
Notice WaterControl 013982-N65 3/07/06 12:30 Page 35
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta dg 5050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta dg 5050 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info