713999

Rommelsbacher EBC3777IN Manual

23
Zoom out
Zoom in
Previous page
1/26
Next page
23
To release the sensors again, the TIMER sensor of any cooking zone ( [5] or [8] ) and the MINUS
sensor of the same cooking zone ( [4] or [7] ) must be simultaneously activated anew. Touch the
TIMER sensor first and keep your finger on the sensor. Then touch the MINUS sensor in addition
within 2 seconds. With the LED [11] above the PAUSE sensor extinguishing, all sensors can be
activated again.
Switching off using the ON/OFF sensor [1] with key lock activated
When the control is deactivated using the ON/OFF sensor [1] while the key lock is active, the
LED [11] above the PAUSE sensor extinguishes as well. When switching on anew, the key lock is
active again until it is cancelled as described above!
7.2 Pot recognition
When a power level setting is
activated without any pot having been
recognised on the
cooking zone, the display shows the pot symbol as depicted on the left, alternating with
the preset power level. Provided no pot is recognised within 10 minutes, the cooking
zone automatically switches into
OFF mode
.
When the pot is removed from the cooking zone during operation, the display as well
shows the pot symbol alternating with the preset power level. Replacing a pot within
10 minutes makes the cooking process continue subject to the previous power level
setting. A timer possibly set before keeps on counting, even without any pot recognition
taking place.
However, if no pot is recognised within 10 minutes, the cooking zone will switch off
automatically.
Self-help:
Make sure the cooking utensils used are qualified for the induction cooking process.
Check the magnetic properties of the pot bottom or approach your pot manufacturer for advice.
Note: Not recognised are small metal objects, such as forks or spoons as well as pots made of
unsuitable material or measuring less than 80 mm in diameter.
7.3 Safety shut-down during permanent activation
Activating one or several sensors
for
longer than 10 seconds (e
.g.
,
through
objects or
spilt food left on the control panel) will prompt an audible signal and the lightning
symbol, as depicted on the left, for a period of 5 seconds. In that case, eliminate the
error cause. Then put the appliance into operation anew.
Activating the ON/OFF sensor permanently will cause the appliance to switch off.
Restarting the appliance is not possible until the error is eliminated!
Self-help: Eliminate the cause of the permanent activation. Having cleaned the surface of the
sensor, the cooking zone can be put into operation again.
7.4 Multiple activations
Activating several sensors simultaneously will not prompt any function. There will be no visual or
audible signals in the absence of permanent activation.
7.5 Temperature control of cooking zones
Each of the cooking zones comes equipped with a temperature sensor underneath the glass
ceramic plate. The control system is based on three steps.
Exceeding the cooking zone’s first (lower) temperature limit will automatically cancel any booster
function possibly activated, with indication “P.” blinking for 3 seconds first. Thereafter, power level
“12.” is set by the control.
Exceeding the cooking zone’s second (medium) temperature limit will cause the control to reduce
the power output automatically to prevent any further increase in temperature. However, the
display will continue to show the preset power level!
Exceeding the cooking zone’s third (upper) temperature limit will cause the cooking zone to switch
off automatically, with error code “F2” (excess temperature) appearing on the display.
7.6 Operating time limitation
The operating time limitation causes the cooking zone to switch off automatically, provided the
settings have not been readjusted for a certain period of time. The operating time limitation is
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EBC3777IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EBC3777IN in the language / languages: English, German as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info