Manual Rommelsbacher EBC3777IN (page 22 of 26) (English, German)

713999

Zoom out

Zoom in

1/26

 When nothing but a timekeeper has been programmed, the control maintains the

wait mode

first (with no other cooking zones being activated). Provided there is no input of new values,

the control proceeds as described and changes into

OFF mode

Timer countdown

 For the last 10 seconds of the timer countdown the indicator always adapts itself to the timer

and counts down the seconds.

 When the countdown of the time is completed, there is an audible signal, and the respective

cooking zone is deactivated. Thereafter, the indications “00” and “H” (if residual heat is

prevailing) appear alternately, while the belonging timer LED is blinking in addition.

 After a maximum of 2 minutes or by activating any sensor, the signalling is stopped.

Interrupting the timer / Altering the timer value (running period)

 The setting value of a timer can be altered at any time after its activation or in

timekeeping

mode

using the PLUS or MINUS sensor.

 A timer can be deactivated by adjusting the setting to “00” using the MINUS sensor. Also, it

can be immediately reset to “00” by activating both the PLUS and the MINUS sensor

simultaneously.

6.7 Pause function (Stop & Go)

During the pause function all active heating zones are deactivated, whereas the

control itself remains in

active mode

. Timers having already been programmed

(timekeepers also) are interrupted and put on hold while the pause function is being

active.

By contrast, operating time limitations continue and are not put on hold.

Attention: While the pause function is active sensors are not being checked for

operating errors.

Activating the pause function

When using at least one cooking zone the heating zones can be deactivated by touching the

PAUSE sensor [2] for at least 1 second. This pause condition can last for a maximum of

10 minutes. If the function is not cancelled during this period, the control will switch itself off. The

cooktop can be deactivated at any time using the ON/OFF sensor [1], cancelling any pause

function possibly set.

Cancelling the pause function

Reactivating sensor [2] and then any other sensor (except sensor [2]) within 10 seconds, the

operating state prevailing before the

pause mode

is restored. Touching the ON/OFF sensor [1]

lightly will bring about the same effect.

Provided no other sensor is activated within 10 seconds, the cooktop switches off automatically.

7. SAFETY FUNCTIONS

This induction hob features numerous safety functions safeguarding the user as well as the

appliance against any accidental or hazardous operating conditions.

7.1 Key lock



This function

allows for

sensors to be locked

preventing

any accidental change of

the

operating state. It provides for the control to proceed in the preset mode (

wait

active mode

) without any sensor permitting activation, except for the unlock

combination and the ON/OFF sensor.

Activating the key lock

To lock the control, the TIMER sensor of any cooking zone ( [5] or [8] ) and the MINUS sensor of

the same cooking zone ( [4] or [7] ) must be activated simultaneously. Touch the TIMER sensor

first and keep your finger on the sensor. Then additionally touch the MINUS sensor within

2 seconds. The LED [11] above the PAUSE sensor is glowing, signalling the active locking

mechanism.

Cancelling the key lock

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EBC3777IN in the language / languages: English, German as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rommelsbacher EBC3777IN Manual

Product: