If the DJ-202 does not function in the way you expect, rst check the following points. If this does not resolve the problem, consult your dealer or a nearby
Roland service center.
ProblemItems to checkActionPage
The power does not turn onIs the USB cable connected correctly?
Make sure that the USB cable is correctly connected to the computer and to the
DJ-202.
p. 8
Serato DJ does not start
Is Serato DJ Intro installed correctly?Uninstall Serato DJ Intro, and then reinstall it.
p. 3
If you’re using Windows, is the user account specied correctly?
Create a new user account with administrative privileges. After creating the account,
install the USB driver and Serato DJ Intro.
The DJ-202 is not recognized
Is the USB cable connected correctly?Make sure that the USB cable is connected correctly.
Could you have connected via a USB hub?You cannot use a USB hub. Connect the DJ-202 directly to your computer via a USB cable.
Is the USB driver installed correctly?Uninstall the USB driver, and then reinstall it.p. 3
Are Serato DJ Intro or Serato DJ updated to the most recent
version?
Use the most recent version of Serato DJ Intro or Serato DJ.
Jog dial does not respondCould the jog dial be dirty?
If the top surface of the jog dial is dirty or if your hand is dirty, the jog dial might not respond.
Make sure that the jog dial and your hand are clean.
No sound, or insucient volume
Are the knobs and faders that adjust the volume set correctly?
Set the [TRIM] knob, channel fader, cross fader, and [MASTER LEVEL] knob to the
appropriate positions.
p. 7
Are the powered speakers or amp connected correctly?Check the connections of the powered speakers or amp.p. 8
Are the connected powered speakers or amp set correctly?Check the volume settings of the powered speakers or amp.
Sound is distorted
Is the [TRIM] knob set correctly?Set the [TRIM] knob to the appropriate position.
p. 7
Is the [MASTER LEVEL] knob set correctly?
Set the [MASTER LEVEL] knob so that the red area of the MASTER level indicator does
not light.
Mic sound is not outputIs the [MIC SENS] knob set correctly?Set the rear panel [MIC SENS] knob to an appropriate position.p. 8
Main Specications
Roland DJ-202: DJ Controller
Signal processingSampling Frequency = 48 kHz
Nominal input levelMIC IN (1/4-inch phone type): -60 dBu
Nominal output levelMASTER OUT: 2.0 Vrms
Input impedanceMIC IN (Combo type): 7 kΩ or greater
Output impedance
MASTER OUT: 1 kΩ
PHONES: 22 Ω
Frequency response48.0 kHz: 20 Hz–22 kHz (+0/-2 dB)
Connectors
MIC IN jack: 1/4-inch phone type
MASTER OUT jacks: RCA phono type
PHONES jacks: stereo 1/4 inch phone type
PC port: USB type B
MIDI OUT connector
DC IN jack
Power supplyUSB bus power
Current draw500 mA
Dimensions
478 (W) x 297 (D) x 62 (H) mm
18-7/8 (W) x 11-3/4 (D) x 2-1/2 (H) inches
Weight
2.1 kg
4 lbs 11 oz
Accessories
Startup Guide
USB cable
* 0 dBu = 0.775 Vrms
* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the Roland
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roland DJ-202 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roland DJ-202 in the language / languages: English as an attachment in your email.
The manual is 3,22 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
