710369
16
Zoom out
Zoom in
Previous page
1/17
Next page
16
System Settings
Pad Item Value (Bold: default) Explanation
R channel [3] Backspin length
OFF Short
Normal Long
When applying backspin to the jog dial, this setting lets you make backspin continue
longer than the distance that the jog dial actually rotated.
OFF Backspin operation occurs according to the actual distance of rotation.
Short Backspin operation is shorter than with the Normal setting.
Normal Backspin operation occurs longer than the actual distance of rotation.
Long Backspin operation is longer than with the Normal setting.
Backing Up or Restoring Sequencer Data
Backup
Heres how to back up patterns 1–16 and kits (instruments).
1. While holding down the mixer sections SAMPLER [CUE] button,
use a USB cable to connect the DJ-202 to your computer.
The SEQUENCER section’s [START/STOP] button blinks, and the
performance pads blink.
2. On your computer, open the “Roland drive.
3. Open the “BACKUP” folder, and copy all les from dj_prm_kit1.
prm through dj_prm_kit12.prm and dj_prm_ptn1.prm through
dj_prm_ptn16.prm to your computer.
4. When copying is completed, operate your computer to eject
the “Roland” drive.
5. Disconnect the USB cable to power-o the DJ-202.
Restore
Heres how to restore the backed-up sequencer data from your computer to
the DJ-202.
1. While holding down the mixer sections SAMPLER [CUE] button,
use a USB cable to connect the DJ-202 to your computer.
The SEQUENCER section’s [START/STOP] button blinks, and the
performance pads blink.
2. On your computer, open the “Roland drive.
3. Copy the backup les into the “Roland drive’s “RESTORE”
folder.
4. When copying is completed, operate your computer to eject
the “Roland” drive.
5. Press the SEQUENCER section’s [START/STOP] button.
The performance pads blink alternately, and then all performance pads
blink.
NOTE
Never turn o the power while the performance pads are blinking
alternately.
6. Disconnect the USB cable to power-o the DJ-202.
MEMO
Sequencer data is compatible between the DJ-202 and the DJ-505.
If the DJ-505’s sequencer data is restored to the DJ-202, aspects that
cannot be reproduced by the DJ-202 are automatically optimized.
Returning to the Factory Settings (Factory Reset)
The system settings and patterns stored in the DJ-202 can be returned to
their factory-set state (factory reset).
1. While holding down the [LOAD] button in the left side (L
channel) of the browser section, use a USB cable to connect
the DJ-202 to your computer, and continue holding down the
[LOAD] button until the SEQUENCER sections [START/STOP]
button blinks.
* If you decide to cancel the operation, turn o the power.
2. Press the blinking [START/STOP] button.
Factory reset begins.
The MASTER level indicator blinks, and then all buttons and pads are lit.
NOTE
Never turn o the power while the MASTER level indicator is blinking.
3. After the factory reset is complete, disconnect the USB cable to
power-o the DJ-202.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-202 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-202

Roland DJ-202 User Manual - German - 17 pages

Roland DJ-202 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info