710369
15
Zoom out
Zoom in
Previous page
1/17
Next page
15
System Settings
1. While holding down the [LOAD] button at the right side (R channel) of the browser section, use a USB cable to connect the DJ-202 to
your computer; continue holding down the [LOAD] button until the SEQUENCER sections [START/STOP] button blinks.
The DJ-202 is in system setting mode.
2. Press the performance pad that corresponds with the setting you want to make.
The MASTER level indicator is lit, indicating the current value of the setting.
3. Use the rotary selector to change the value of the setting.
4. When you’ve nished making settings, press the blinking [START/STOP] button.
All of the MASTER level indicators are lit, and then all buttons and pads blink.
5. Disconnect the USB cable to power-o the DJ-202.
Pad Item Value (Bold: default) Explanation
L channel
[1] Mic audio low cut lter setting
OFF 1
2 3
4 5
6 7
8 9
10
Adjusts the strength of the low cut lter applied to the mic audio.
1–10 Higher values produce a stronger eect.
OFF The low cut lter is not applied.
[2] Mic audio noise gate setting
OFF 1
2 3
4 5
6 7
8 9
10
Species the strength of the noise gate applied to the mic audio.
1–10 As the value increases, even higher-level sound will be cut.
OFF The noise gate is not applied.
[3] Mic input eect selection
OFF Reverb
Delay Delay + Reverb
Species the eect that is applied to the mic audio.
Reverb Reverb is applied.
Delay Delay is applied.
Delay + Reverb Delay and reverb are applied simultaneously.
OFF No eect is applied.
[4] Mic input eect setting
OFF 1
2 3
4 5
6 7
8 9
10
Adjusts the depth of the eect that is applied to the mic audio.
1–10 Higher values apply the eect more deeply.
OFF No eect is applied.
[5] Master output adjustment
0 -3
-6 -12
-18
Adjusts the reference level of the master output.
[6] Margin at both ends of cross fader
0 1
2 3
4 5
6 7
8 9
10
Species the margin at both ends of the cross fader. Higher values increase the margin,
providing more play at each end of the cross fader.
[7] Demo mode time setting
OFF 1
2 3
4 5
6 7
8 9
10
Species the time (minutes) from when the DJ-202 was last operated until it enters demo
mode.
If this is OFF, demo mode will not operate.
[8] LED brightness adjustment
0 1
2 3
Adjusts the brightness when a button, pad, or indicator is lit.
Higher values decrease the brightness.
R channel
[1] USB mode setting
Generic Vendor
Set this as appropriate for the USB driver that you’re using.
Generic
Choose this if you want to use the generic USB driver provided by your
computer’s operating system.
* If the USB mode is set to Generic, you can not use Serato DJ Intro /
Serato DJ.
Vendor
Choose this if you want to use the dedicated DJ-202 USB driver that you
downloaded from the Roland website.
[2] Jog dial top surface sensitivity adjustment
Normal Level 1
Level 2 Level 3
Level 4 Level 5
Adjusts the sensitivity for when you take your hand o of the jog dial.
Normal Normal sensitivity.
Level 1–5 Higher values improve the response.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-202 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-202

Roland DJ-202 User Manual - German - 17 pages

Roland DJ-202 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info