490712
8
Zoom out
Zoom in
Previous page
1/68
Next page
Intended use
Safety instructions
8
Technical data
Operating controls & Description
Type reference PLP 300
Voltage
Frequency
Rated input
Power output
Speed: no-load
rated load
Planing depth
Planing width
Weight of the electric tool
Safety Class
230V~
1 470 W
7
50-60Hz
2 100 W
10 300 min
220 min
0-3mm
300 mm
16 kg
II /
-1
-1
GB
1. Main handle of the planer
2. Mains switch
3. Lock-off button
4. Overload protection button
5. Front handle, swiveling (for planing depth
adjustment)
6. Planing depth scale
7. Front shoe, adjustable
8. Fixed shoe
9. Guide roller
10. Air inlet openings
11. Chip discharge openings
12. Chip deflector
13. Chip deflector fixing knob
14. Machine housing cover
15. Cutting head with blades
16. Reversible blade
17. Blade backing plate
18. Blade clamping rail
19. Hole for insertion of the locking pin for blade
replacement, preventing rotation of the cutting
head
20. Blade fixing screws
22. Driving belt guard
23. Brush cap with carbon brush
The accessories shown or described in this Operating
Manual may not be included as a part of delivery.
The carpentry planer is universally applicable for
planing and smoothing of visible surfaces on rafters,
e.g. projecting rafters, rafter ends and purlins; it may be
also utilized for planing structural timber and lattice
work, as well as for other carpentry works or
woodworking in general.
The user is solely liable for damage and accidents
caused by improper use of the product.
This electric tool may only be used, maintained and
repaired by the people who have received the
relevant instructions. These people must have
reached the minimum age legally required. For safe
work and familiarizing with all the remaining risks,
they must have read and understood this Operating
Manual.
1. For maximum safety of work with this electric tool,
read this Operating Manual carefully and observe
all the instructions given herein.
2. Follow the safety instructions supplied separately
as a part of delivery with each electric tool.
3. The electric tools shall not be used in damp or wet
locations, outdoors in the presence of rain, fog,
snow, or if there is a risk of fire or explosion.
4. Check the power supply cord and plug before each
use of the electric tool. Have any defect repaired
by a professional service workshop.
5. Remove plug from the mains before performing
any work on the electric tool.
6. Only insert plug in the mains socket when the
electric tool is switched off by the mains switch.
Always keep the power supply cord back away
from the electric tool while working and allow the
cord to move freely in the whole working area to
make trouble-free work possible.
7. When working outdoors, use exclusively the
extension cords and cable connectors attested for
outdoor use.
8. The electric tool may only be started after placing it
on the workpiece in initial position.
For safe work with this electric tool and prevention of
injury, it is imperative to follow all generally accepted
safety principles and regulations for prevention of
accidents, and read the enclosed "Safety instructions”
thoroughly.
The manufacturer disclaims liability for damages
caused by unauthorized modifications or using other
than the supplied or specified accessories with the
electric tool.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool PLP 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool PLP 300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info