645092
9
Zoom out
Zoom in
Previous page
1/11
Next page
POWX0495 EN
Copyright © 2016 VARO P a g e | 9 www.varo.com
8.5 Grinding
Switch on the power tool, apply the entire sanding surface to the surface to be worked,
and move it across the work piece using moderate pressure.
Be sure to apply pressure evenly to extend the life of the grinding tools.
Increasing the application pressure excessively will not yield high sanding performance
but higher wear of the power tool and the grinding tools.
Do not use a grinding tool which has been used for metal for other materials.
9 MAINTENANCE AND CLEANING
RISK OF INJURY! Switch the device off and pull the plug out of the mains
socket before carrying out any work on the device.
Do not use sharp objects to clean the device. Do not allow any liquids to enter the device.
Ignoring this advice may damage the device.
Always have carbon brushes replaced by service or an authorised specialist workshop.
The device is maintenance free other than this.
Clean the device regularly, preferably always immediately after finishing work.
Use a dry cloth to clean the housing. Under no circumstances should you use petrol,
solvent or cleaners which attack plastic.
You will need a vacuum to deep clean the device.
Vents must always be clear.
Use a brush to remove dust clinging to the device.
10 TECHNICAL DETAILS
Rated voltage AC
230-240V
Rated frequency
50 Hz
Rated power
300 W
Rotation speed
1600-3000 min
-1
Shaft diameter
10 mm
Cable length
3 m
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
83 dB(A)
Acoustic power level LwA
94 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
2.5m/s²
K = 1.5 m/s²
12 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0495 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0495

Powerplus POWX0495 User Manual - German - 12 pages

Powerplus POWX0495 User Manual - Dutch - 12 pages

Powerplus POWX0495 User Manual - French - 12 pages

Powerplus POWX0495 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info